Combustion Test Manikin

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

The Burning Manikin System is primarily applied in the following areas:

Fire Environment Simulation: This system simulates high-risk fire environments, realistically recreating flashover scenarios. Using a burning manikin testing system and accompanying software, it evaluates the flame-retardant performance of protective clothing.

Thermal Protection Performance Assessment: By placing thermal sensors on the manikin model, it measures and calculates the heat and temperature transmitted through the clothing to various parts of the manikin's surface, thereby predicting the possible locations and extent of burns.

Fire Environment Research: This system helps researchers analyze the heat transfer mechanism between the heat source, clothing, and the human body in a fire environment, improving the thermal protection performance of protective clothing.

Firefighter Protection: Through burning manikin testing, it evaluates the heat insulation performance of fire suits, optimizing designs to reduce the rate of burns.

These applications contribute to improving the survivability of firefighters and soldiers under high-intensity flame conditions.

Standards

EN ISO 11612：rotective clothing - Clothing to protect against heat and flame - Minimum performance requirements

EN ISO 11611：Protective clothing for use in welding and allied processes - Minimum basic safety requirements

ISO 13506：Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin

EN469:2005：Protective clothing for firefighters - Performance requirements for protective clothing for firefighting

ISO13506-1：Protective clothing against heat and flame- part1: Test method for complete garments-Measurement of transferred energy using an instrumented manikin

ISO13506-2：Protective clothing against heat and flame- part2: Skin burn injury prediction- Calculation requirements and test cases

ASTM F1930：Standard test method for evaluation of flame-resistant clothing for protection against fire simulations using an instrumented manikin

GB8965.1：Protective clothing - Flame retardant protective clothing

Parameters

Parameter	Description
Dimensions (L×W×H)	14m × 6m × ≥6m
Weight	2000 kg
Thermal Sensors	Monitor heat flux changes on mannequin surface; quantity varies by design
Combustion Flame Array	Multiple propane generators arranged around mannequin to simulate fire
Gas Supply System	Provides stable gas via high-pressure tanks and pipelines
Combustion Chamber	Houses flame array and mannequin for safe, controlled experiments
Data Acquisition System	Collects data from thermal sensors with processing units and cables
Testing Software	Controls experiments, analyzes data, and generates visual reports
Calibration Tools	Ensure accuracy and reliability of sensor data through calibration

Accessoriess

1. The burning manikin model uses 1: 1 adult male model, the material is FRP with stable, flame inert and high strength performance, and 2 ~ 3mm thickness, 1.72m2 surface area. There are a certain number of sensors in the manikin model’s head, trunk, legs and arm surface evenly. The manikin model’s outer surface paints black and flame retardant coating. The processed sensor data export lines on the head facilitate the instrument to capture the data signal.

2. The sensor group includes thermal sensor and pressure sensor. The heat sensor consists of more than 120 heat flow sensors, which are evenly distributed on the manikin's surface, and each sensor represents the physical condition of the skin of a certain surface area. Numbered every sensor, and if the temperature value calculated by the sensor passes burns are estimated to meet the two or three burning degrees, then mark them into a simulated digital human body model with different colors. Since the flame temperature change is a dynamic process, the test sensor temperature range is higher and the response time is shorter to achieve the flame dynamic process of the test. Pressure sensor is mainly used to measure the gas container and gas pipeline gas pressure value, to ensure safe and controllable experimental.

3. The flame generation device consists of 6 groups of 12 propane flame generators around manikin. Each group of flame generators consists of a high pressure liquefied gas tank, a buffer gas tank, a pressure pipe and a gas pressure sensor, a adjustable flame nozzle, and a pilot flame device. Flame action time is controlled by the computer control simulation module, the flame intensity during this period maintains uniform and stable.

4. The computer control module is composed of pre-programmed software. The main function is to automatically check the status of each group of sensors associated with the experiment before the start of the experiment. Send the command when no problem. In the course of the experiment, the computer control program controls the time and intensity of the flame generator, automatically guide the data processing module and record the data changes of the various sensors. In the end of experimental stage, downloaded and saved the recorded data into the form of the document, and guide the exhaust ventilation system on the combustion test chamber for ventilation.

5. Data acquisition and processing simulation. With the help of computer control module, preprocess the signal of the amplification, conversion and storage data for control temperature sensor and heat flow sensor acquisition. the heat flow signal transfer into the corresponding temperature value through the model, and then the results are temporarily stored for the burn estimator module use.

6. The burn estimation module is intended to estimate the extent of burns caused by the flame. The information of the manikin surface temperature value obtained by the sensor is input to the burn estimation model. After the burn estimation operation, the burn integral value and the burn program value are obtained. Combined with the plot of the digital human body model to get the second and third degree burns on the scattergram manikin's surface.

Other supplier products

	Automated needle flow tester for syringes	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed to meet the following standards: (1) YY 0321.1: Disp...
	Plastic Friction and Wear Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description: Plastic sliding friction wear tester consists of two main parts: the ...
	Spring torsion fatigue tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Spring torsional fatigue testing machine (horizontal) is a new type ...
	Industrial Rubber Mooney Viscosity Testing Equipment ASTM International	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 1232 — Unvulcanized rubber: Determination of Mooney...
	Airflow velocity distribution measurement system manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for the characterisation of the air flow velocity profile of comp...

供应产品

Same products

	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...
	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...