Automatic stapler blade tester equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
The sharpness tester for stapler blades is mainly used to assess the sharpness of blades for medical staplers, ensuring the quality of surgical instruments and the surgical outcome. Specifically, the tester simulates the process of the blades cutting materials, measures and analyzes parameters such as the force and displacement during cutting, and then determines the sharpness value of the blades. This test result not only provides important quality - control evidence for medical device manufacturers but also offers reliable reference data for medical workers when choosing surgical instruments.
Standards
YY/T 1797 - 2021： Surgical blades - Test method for sharpness and cutting performance
Technical Parameters
| Parameter | Specification |
|---|---|
| Testing Accuracy | ±0.01N |
| Testing Speed | 0.05–600mm/min (Some models may vary, e.g., 600mm/min±30mm/min) |
| Testing Material | Complies with the 3-0 uncoated silk-like twisted strand suture specified in YY0167-2005 (or other standard testing materials) |
| Power Supply | 220V 50Hz; Overall Power Consumption: 70W (or other values) |
| External Dimensions | 400×290×275mm (or other dimensions) |
| Net Weight | 15kg (or other values) |
Accessoriess
Standard configuration: Main unit, mini printer
Optional accessories: Professional software, communication cable
Test Procedures
1. Pre-test Preparation
Check the instrument's power supply (220V 50Hz) and component connections to ensure they are functioning correctly. Start the instrument and allow it to warm up to a stable operating state;
Calibrate the force sensor (ensuring an accuracy of ±0.01N), and prepare the test materials (such as 3-0 uncoated silk twisted suture as specified in YY0167-2005).
2. Sample and Test Medium Installation
Fix the stapler blade to be tested onto the instrument's dedicated fixture, ensuring the blade angle, position, and cutting path are aligned and there is no looseness/offset;
Install the test medium (such as standard suture) onto the cutting platform, adjusting its position to precisely align with the cutting edge of the blade.
3. Test Parameter Settings
Using the touchscreen interface, select the appropriate standard (YY/T 1797-2021), set the test speed (e.g., 0.05–600 mm/min), data acquisition frequency, and other parameters. Confirm and save the configuration.
4. Starting the Test
After confirming that the blade and medium are correctly positioned, click the "Start" button. The instrument will automatically simulate the cutting process, collecting and displaying cutting force, displacement, and other data in real time.
5. Test Process Monitoring
Observe the data changes on the interface to ensure that there are no abnormalities during the cutting process (such as blade jamming or medium displacement). If problems occur, pause and adjust immediately.
6. Test Completion and Cleanup
After the test is completed, the instrument will automatically shut down. Record/export the sharpness-related data (such as initial cutting force and displacement curve);
Loosen the fixture to remove the blade and remaining test medium, clean the fixture and cutting platform, turn off the instrument's power, and prepare the test report.
在线联系供应商
Other supplier products
 |
Coating thickness gauge/film thickness gauge | Standard Coating Thickness Gauge complies with international standards includingASTM B499,ASTM D1400,ISO 2178,ISO 2360, andGB/T 4956, ensuring rel... |
 |
Drive-in Solar Simulation Automotive Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Full Vehicle Sunlight Simulation Test Chamber is designed to evaluate the agi... |
 |
Automotive Oil Filter Leak Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Oil Filter Hydrostatic Breakage Tester is a test bench independently deve... |
 |
Automatic suture needle elasticity and toughness device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Quality Control: In the production process of medical devices, it is used for... |
 |
Room corner fire testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use this apparatus in the following scenarios: Full-scale fire perfor... |
Same products
 |
Metal Angular Fixator Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine... |
 |
Bone Plate Four-Point Bending Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue... |
 |
Bone Plates Static Four - point Bending Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending... |
 |
Spinal Internal Fixation System Assembly Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem... |
 |
Spinal Internal Fixation System Component Testing Machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo... |
