.

Hydraulic Oil Filtration and Dewatering Tester

Get a quote:

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

The Hydraulic Oil Filtration and Dewatering Tester is an industrial device primarily used for dehydrating and filtering high-viscosity hydraulic oils, lubricating oils, and other fluids, with an applicable viscosity range of N32. The front end of the equipment utilizes a polypropylene (PP) bag filter, which can remove 98% of particulate contaminants. A dehydration filter element further reduces the water content to below 100 ppm at a low cost, eliminating the need for expensive imported ultra-fine dehydration filter elements. Combined with non-heated oil-water separation technology, it achieves dehydration efficiency more than 20 times that of traditional equipment. The downstream stage is equipped with a 3µm high-precision polypropylene filter, ensuring oil cleanliness reaches NAS8 level.

Applications

Hydraulic and lubrication system oil purification and filtration;

Hydraulic and lubrication system oil degassing;

Hydraulic and lubrication system oil demulsification;

Hydraulic and lubrication system oil dewatering.

Standards

GB/T 44053-2024:Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of filter elements

ISO 18237:2017:Hydraulic fluid power — In-line filters — Qualification test procedures

Features

1. the oil filter includes two motor-driven special gear pumps, with low noise, self-absorption capacity, smooth operation and other characteristics;

2. high-pressure pipeline is equipped with an overflow protection device, which can effectively protect the hydraulic system's Safety;

3. the use of thermal relay protection to prevent motor damage caused by motor overload;

4. suction port coarse filter to protect the oil pump and extend the service life of the fine filter;. 5. the pump is equipped with a two-stage fine filter after the pump to protect the oil pump.

5. Two-stage fine filter is provided after the pump, so that the oil can quickly reach high cleanliness and achieve the required result;

6. The fine filter can be selected with different precision according to the different needs of users to achieve the required result;

7. The panel is equipped with a pressure gauge, which continuously indicates the operating status of the system and the degree of contamination of the filter element during the working time;

8. The adoption of a separate heating system can effectively solve the impact on the life of the filter element in case of a low ambient temperature. The influence on the life of the filter element is effectively solved in the case of low ambient temperature.

Technical Parameters

Technical ParametersDetails
Rated flow rate (L/min) 40. 100. 150
Rated pressure (MPa) 0.6
Original pressure loss (MPa) ≤0.2
Coarse filtration precision (μm) 100
Primary filtration precision (μm) 25. 40
Secondary filtration precision (μm) 3. 5. 10
Motor power (Kw) 1.1+0.75. 2.2+1.1. 4+1.1
Voltage (V) 380
Weight (Kg) 380. 480. 680
External dimensions (mm, L×B×H) 1500×800×1700. 1800×1000×1800. 2200×1100×1800


在线联系供应商

至: Standard Groups
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Leather edge oil fatigue testing machine
Leather edge oil fatigue testing machine The Leather Edge Oil Fatigue Testing Machine is designed to evaluate the fatigue resistance of edge coatings applied on leather, synthetic leather,...
Crockmeter/Rubbing Fastness Tester | Testing Equipment
Crockmeter/Rubbing Fastness Tester | Testing Equipment Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Electronic rubbing colour fastness testeris designed with a base, rubbing rotation...
Conduit Bending Test Machine
Conduit Bending Test Machine Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Conduit Bending Test Machine is designed to evaluate the bending and torsion r...
Stick-Slip – Tribological Test Stand (G-SSP) | ASTM ISO Testing Machine
Stick-Slip – Tribological Test Stand (G-SSP) | ASTM ISO Testing Machine Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Stick-Slip Tribological Test Stand is a laboratory testing system used to eval...
Dry Friction and Wear Tribometer (Value Engineered Tribometer)
Dry Friction and Wear Tribometer (Value Engineered Tribometer) Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Dry Friction and Wear Tribometer is a value-engineered, multi-functional testi...
供应产品

Same products

Laser Chuck
Laser Chuck 卖方: 00000 Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
Power Pallet Jack For Sale
Power Pallet Jack For Sale 卖方: Jinan Hulk Machinery Co., Ltd Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
Multi Directional Forklift For Sale
Multi Directional Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
Narrow Aisle Forklift For Sale
Narrow Aisle Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...
Electric Order Picker Supplier
Electric Order Picker Supplier 卖方: Jinan Hulk Machinery Co., Ltd Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co...