Freeze and Humidity Test Chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This chamber is widely used in photovoltaic and related renewable energy fields, including but not limited to:
Thermal cycling and damp heat freeze reliability testing of crystalline silicon photovoltaic modules (monocrystalline and polycrystalline)
Environmental durability evaluation of thin-film photovoltaic modules such as CdTe, CIGS, and amorphous silicon
Temperature and humidity resistance verification of photovoltaic encapsulation materials including EVA, backsheets, glass, and encapsulants
Design verification (DV) and type testing (TT) during photovoltaic module development
Factory inspection and consistency quality control of photovoltaic modules
Standardized photovoltaic module testing in third-party inspection and certification laboratories
Environmental reliability research of new energy materials and devices in universities and research institutes
Standards
(1)GB/T 9535 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)GB/T 18911 Photovoltaic Modules – Environmental Test Methods
(3)GB/T 2423.1 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test A: Cold
(4)GB/T 2423.2 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test B: Dry Heat
(5)GB/T 2423.3 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test Ca: Damp Heat, Steady State
(6)IEC 61215 Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(7)IEC 61730 Photovoltaic (PV) Module Safety Qualification
(8)IEC 60068-2-1 / IEC 60068-2-2 / IEC 60068-2-30 Environmental Testing – Cold, Dry Heat, Damp Heat
(9)UL 1703 Standard for Flat-Plate Photovoltaic Modules and Panels
(10)JIS C 8918 Environmental Test Methods for Photovoltaic Modules (partially applicable)
Parameters
| Item | Technical Specification |
|---|---|
| Temperature range | -40 ℃ to 85 ℃ |
| Temperature fluctuation | ≤ ±1 ℃ |
| Temperature deviation | ≤ ±1 ℃ |
| Temperature uniformity | ≤ ±2 ℃ |
| Heating and cooling rate | Compliant with IEC 61215 requirements |
| Humidity range | 30 %RH to 98 %RH |
| Relative humidity deviation | ±3 %FS; 85 ±2 %RH; 90 ±2 %RH |
| Humidity fluctuation | ±2 %RH |
| Humidity uniformity | ≤ 2 %RH |
| Temperature change rate | ≤ 100 ℃/h |
| Extreme temperature dwell time | ≥ 10 min |
| Test cycle count | 200 cycles or 50 cycles |
| Maximum sample capacity | 12 photovoltaic modules |
| Inner chamber dimensions | Approx. 1.5 × 2.5 × 1.5 m (L × W × H) |
| Outer chamber dimensions | Approx. 2.5 × 3.0 × 2.5 m (L × W × H) |
| Power supply | AC 380 V / 60 Hz |
Accessories
(1)Programmable control system with touchscreen interface
(2)High-precision industrial-grade temperature and humidity sensors
(3)Refrigeration compressor unit using environmentally friendly refrigerant
(4)Photovoltaic module sample racks compatible with multiple module sizes
(5)Drainage and condensation management system
(6)Optional data acquisition and management software for PC connection and data export
(7)Optional remote monitoring module for operation status viewing
(8)Consumable sealing strips for periodic replacement
(9)Humidity water filtration components to ensure humidification water quality
在线联系供应商
Other supplier products
 |
Single Cable Vertical Flame Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single i... |
 |
Photovoltaic module outdoor exposure test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Outdoor Exposure Test System is designed to simulate real-world env... |
 |
Fabric Vertical Flame Spread Test Machine with ISO 6941 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Products: This machine is suitable for one-component or multi-component (coating, quilt, l... |
 |
Carpet Peel & Tuft Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Carpet Peel & Tuft Tester is designed to evaluate the retention performance of tuft... |
 |
Carpet tuft length measuring instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard BS 4223:1989 (British Standard): Specifies methods for determining the pile len... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
