Laboratory dynamic wear and scratch testing system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1) BMW GS 97034-8 – Automotive interior materials surface tilt test specification
(2) BMW GS 97034-9 – Automotive interior materials surface scratch test specification
(3) GB/T 23989-2009 – Determination of scratch resistance of coatings
(4) GB/T 1768-2006 – Paint film wear resistance measurement
(5) GB/T 12444-2006 – Metallic materials wear test method
(6) ISO 7148 – Metallic materials – Friction and wear test method
(7) ASTM G171 – Scratch hardness determination of materials
(8) ASTM G133 – Reciprocating sliding wear test method
(9) ASTM G99 – Pin-on-disk friction and wear test method
(10) ASTM D7027 – Evaluation of scratch resistance of polymer coatings
Parameters
| Test Function | Technical Specification |
|---|---|
| Test Force Range | 0~30 N (adjustable in 1 N increments) |
| Stroke Length | Up to 120 mm |
| Test Line Speed | Up to 1500 mm/s |
| Cycle Count | 0~999.999.999 (programmable) |
| Sample Type | Sample A: Disk edge, radius 2.5 mmSample B: Pin tip |
| Working Stage | X-Y working test stage |
| Power Supply | AC 220 V, 50 Hz, 750 W |
Features
Dual control system: PLC + Windows, allowing system switching.
User-friendly interface: 12-inch embedded industrial computer with Chinese/English option.
Supports Wi-Fi connection to printers for automated reporting.
Real-time curve display for monitoring scratch and wear performance.
Capable of testing both flat and curved samples with interchangeable test heads and media.
Flexible programming for test mode, speed, stroke, and applied load.
Supports both wet and dry testing methods.
Accessories
(1) Various test heads for different surface types
(2) Sample clamps for flat and curved specimens
(3) Test media (textiles, abrasive pads, pins, or disks)
(4) User manual
Test Procedures
Sample Preparation
Secure the sample on the X-Y test stage using appropriate clamps.
Ensure curved samples are properly supported to avoid deformation.
Parameter Setting
Select test mode (scratch, wear, or impact) in software.
Program test speed, stroke length, applied load, and number of cycles.
Confirm testing medium or stylus is correctly installed.
Running the Test
Start the program; the tester executes pre-set motion patterns.
Monitor test curves and data in real-time.
Upon completion, the system automatically stops and returns to initial position.
Post-Test Evaluation
Inspect the sample surface for scratches, wear, or impact damage.
Export test data and generate reports as needed.
在线联系供应商
Other supplier products
 |
Pinhole Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The pinhole tester for aluminum foil is a device specifically used to detect micro - pinhol... |
 |
45 Degree Burn Resistance Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The 45° flammability tester consists of a control system and a combustion... |
 |
Double Plate Thermal Conductivity Apparatus Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The double plate thermal conductivity tester, with an integrated water bath t... |
 |
ASTM ISO Bearing Torque Testing Equipment Supplier Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Bearing friction torque is an important factor affecting bearing noise, vibra... |
 |
Masks Flame Retardant Tester丨Masks Flame Retardant Testing mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The flame-retardant tester of medical mask is used to test the flame-retardan... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
