Multi-Functional Friction and Wear Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM G99-17: Standard Test Method for Wear Testing of Metal-Metal Sliding Contacts
ASTM G133-05: Standard Test Method for Wear Testing of Rubber and Polymers
DIN 50324-2010: Friction and Wear Testing Standards
Technical Specifications
| Item | Specification |
|---|---|
| Normal Force Range | Up to 60 N |
| Friction Force Range | Up to 20 N (optional 5 N) |
| Friction Force Resolution | 0.06 mN (optional 0.015 mN) |
| Rotational Motion Speed | 0.2–2000 rpm (optional 600 rpm) |
| Rotational Radius | Max 40 mm |
| Maximum Torque | 450 mN·m |
| Linear Reciprocating Stroke | Max 60 mm |
| Linear Reciprocating Speed | Up to 370 mm/s |
| Linear Reciprocating Frequency | 0.01–10 Hz |
| Rotational Reciprocating Speed | 0.2–2000 rpm (optional 600 rpm) |
| Rotational Reciprocating Frequency | 0.01–7 Hz |
| Rotational Reciprocating Angular Amplitude | ±5° to ±150° |
| Deflection Angle Resolution | 0.1° |
| Environmental Control (Optional) | Temperature: up to 450℃ (dry), 150℃ (liquid); Relative humidity: 15–95%; Vacuum: ≤10⁻⁷ mbar |
| Online Measurement (Optional) | Wear depth: -2 mm to 2 mm |
| Control System | Integrated sensors for real-time monitoring of temperature and humidity, supports “Stress Model” analysis software |
| Software Functions | Standard, incremental, and user-defined parameters; Python programming interface for cyclic and reciprocating motion analysis |
Features
Dual Friction Force Sensors: Minimizes thermal drift and ensures reliable data during long-term testing or environmental changes
Real-Time Environmental Monitoring: Integrated sensors record temperature, humidity, and friction force over time, enabling correlation analysis with friction coefficients
User Calibration: You can calibrate friction force, rotational radius, and motor speed to maintain testing accuracy over time
Multiple Motion Modes: Supports rotational, linear reciprocating, and rotational reciprocating motion to simulate complex friction scenarios
High-Precision Measurement: Friction resolution up to 0.06 mN and angle resolution of 0.1°, meeting high-precision research and industrial requirements
Optional Environmental Control: Supports heating, liquid testing, vacuum, and humidity control for diverse material testing conditions
Advanced Software Analysis: Comes with “Stress Model” software for data visualization, simulating contact stress and strain distribution, and facilitating parameter selection and result evaluation
Accessories
| Accessory / Consumable | Description |
|---|---|
| Friction Force Sensors | Dual sensors for high-precision measurement |
| Heating Device | Optional, max 450℃ (dry) and 150℃ (liquid) |
| Vacuum Device | Optional, down to 10⁻⁷ mbar |
| Sample Stage | Compatible with rotational, reciprocating, and rotational-reciprocating motion |
| Tools & Adjustment Components | For calibration and installation |
| Software | Tribology test control software and Stress Model analysis software |
| Data Interface | Supports Python programming environment for data processing |
| Safety Cover | Protects operators from moving parts |
Testing Principle
The Multi-Functional Tribology Tester applies controlled loads via precision loading mechanisms, bringing the friction pair into contact with the sample surface. By performing rotational, linear reciprocating, or rotational-reciprocating motion, the device simulates friction and wear behavior under various conditions. Sensors record friction force, torque, and displacement in real time, and environmental parameters such as temperature and humidity are integrated into the analysis to evaluate material tribological performance and wear patterns.
Operation Instructions
Mount your sample on the adjustable stage, ensuring the contact surface is flat.
Select the desired friction mode (rotational, linear reciprocating, or rotational-reciprocating) and set the normal force and friction pair type.
Configure test speed, frequency, and number of cycles, then start the device.
Monitor friction force and environmental parameters using the integrated sensors.
After the test, save data and evaluate friction and wear results using the analysis software.
Follow safety precautions, avoiding direct contact with moving parts and high-temperature areas.
Experimental Procedure
Sample Preparation: Clean, dry, and secure the sample to ensure a contaminant-free surface.
Equipment Setup: Select the friction pair, applied load, motion mode, and speed parameters.
Environmental Adjustment: Set temperature, humidity, or vacuum conditions as required.
Start Test: Run the device while friction pairs move and friction/wear data are recorded in real time.
End Test: Save all experimental data and analyze friction coefficient curves and wear depth to assess material performance.
Repeat experiments or adjust parameters for comparative testing if needed.
在线联系供应商
Other supplier products
 |
Liquid Sustained Combustion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
 |
Waterproof Socks Performance Testing Apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Shoes Water Penetration Test Apparatus is used to test waterproof performance of shoes sock... |
 |
UVA 340 Fluorescent Lamp for UV Aging Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Related Test Equipment -UVAgingChamber Control system: Precise regulation, monitoring of ... |
 |
Vibration Testing Platform | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D999: Vibration testing of shipping containers and packaged products. TAP... |
 |
Catheter Airflow Resistance Tester ISO & ASTM Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Airflow Resistance Tester is a precision testing instrument spec... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
