Burn rate evaluation equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test N.1: Test Method for Flammable Solids issued by the United Nations, GB/T 21618 - 2008 Test Method for Burning Rate of Flammable Solids in Dangerous Goods, and NY/T 1860.15 - 2010 *Guidelines for Physicochemical Property Testing of Agricultural Chemicals - Part 15: Solid Flammability.
Applications
This testing instrument is used to determine the ability of a substance to propagate combustion. After igniting the substance, the combustion time is determined. It is suitable for granular, pasty, or powdery substances.
Standards
It conforms to the United Nations Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.2.1.4 Test N.1: Test Method for Flammable Solids; conforms to GB/T 21618-2008 "Dangerous Goods - Test Method for Burning Rate of Flammable Solids"; conforms to NY/T 1860.15-2010 "Guidelines for Determination of Physicochemical Properties of Pesticides - Part 15: Flammability of Solids"; conforms to GB 5085.4 "Identification Standards for Hazardous Waste - Flammability Identification" 4.2 Flammable Solid Test; conforms to GAT536 "Classification and Test Methods for Fire Hazards of Flammable and Explosive Hazardous Goods"; and conforms to national standards and industry standards that are equivalent or equivalent to the above standards.
Features
(1)It adopts an embedded processor and Windows CE operating system.
(2)With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
(3) It integrates two functions, "sieving experiment" and "combustion rate experiment", into one.
(4)It is applicable to the detection of two types of sample materials: non - metallic powder and metallic powder.
(5) It is equipped with a standard stacking mold and features a user - friendly shaking handle design.
(6)Strictly in accordance with standard requirements, an ignition torch is used for the sieving experiment, eliminating the need for a gas cylinder and ensuring safety.
(7) A nitrogen rod is used as the ignition source for the combustion rate experiment. The material has high stability, and the ignition source temperature detection device ensures that the ignition temperature reaches above 1000°C.
(8) It uses full - automatic infrared flame detection technology, which can reliably detect open flames and smoldering phenomena, ensuring detection accuracy.
(9) It has a fault - detection function and audible and visual alarm functions to ensure the safety of the experiment.
(10) The experimental process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical Parameters
|
Operating environment |
(5~40)°C, <85%RH |
|
Ignition source temperature |
≥1000°C |
|
Ignition method |
Gas igniter with nitrogen-silicon rod |
|
Combustion detection stroke |
(0~250)mm |
|
Combustion distance measurement accuracy |
±0.5mm |
|
Timing range |
5min (non-metallic); 20min (metallic) |
|
Timing display resolution |
0.1s |
|
Pile stack mold |
Triangular-shaped molds 260mm long, 20mm wide, profiled to an inner height of 10mm |
|
Burner plate |
Flat plate made of corundum mullite, impervious to penetration, non-combustible, and with low thermal conductivity |
在线联系供应商
Other supplier products
 |
Automatic Hexapod Tumbler Fatigue Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Hexapod Tumbler test machine uses a steel ball with spikes or a hexagonal... |
 |
Automated high-pressure steam spray chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Steam Jet Test Chamber complies with a broad set of international automotive... |
 |
Intramedullary Nails Four - point Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intr... |
 |
Box-Type UV Accelerated Aging Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com This test chamber simulates the hazards caused by sunlight exposure and rain. It utilizes f... |
 |
Friction and wear testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T ... |
Same products
 |
Laser Cutting Machines | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
