Universal Multifunction Tribology Test Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Universal Multifunction Tribology Test Machine (UMT Series) is a versatile friction and wear testing system designed for comprehensive tribological evaluation in academic, research, and industrial laboratories. You can perform friction, wear, indentation, and scratch tests on a single platform while obtaining high-precision, repeatable, and reliable data.
The system supports extremely low friction coefficient measurement (down to 0.004) and enables rapid generation of Stribeck curves for in-depth lubricant and material performance analysis. Its modular architecture and interchangeable environmental chambers allow you to adapt the system to a wide range of operating conditions while maintaining compliance with major international testing standards.
Application
You can use this system for a wide variety of tribological and material performance evaluations, including:
Fundamental tribology research and surface performance characterization
Friction and wear testing of lubricating oils and greases
Tribological evaluation of metals, ceramics, polymers, composites, and coatings
Indentation and scratch testing for hardness, elastic modulus, and coating adhesion
Friction and wear testing under high temperature, low temperature, humidity, corrosive, and vacuum environments
Standardized testing in universities, research institutes, and industrial R&D laboratories
Typical tested products include lubricants, bearing materials, surface coatings, engineering plastics, ceramic components, and functional thin films.
Standards
The system is compatible with, but not limited to, the following international standards:
(1) ASTM G77 – Block-on-Ring Wear Testing
(2) ASTM G99 – Pin-on-Disk Wear Testing
(3) ASTM G132 – Ball-on-Three-Plate Wear Testing
(4) ASTM G119 – Reciprocating Sliding Wear Testing
(5) ASTM G203 – Reciprocating Wear of Materials
(6) ASTM G204 – Sliding Wear Under Controlled Conditions
(7) ASTM G206 – Oscillatory Wear Testing
(8) ASTM G133 – Linearly Reciprocating Ball-on-Flat Wear Testing
(9) ASTM G174 – Scratch Testing of Materials
(10) ASTM D3702 / ASTM D3704 / ASTM D2981 / ASTM D2509 – Lubricant and Grease Wear and EP Performance
Parameters
Motion Drive Modules
| Drive Type | Typical Applications | Speed / Frequency Range | Torque / Stroke | Applicable Standards |
|---|---|---|---|---|
| Rotary Drive | Ball-on-disk, pin-on-disk, disk-on-disk | 0.1 – 5,000 rpm | Torque up to 5 Nm | ASTM G99, ASTM G132, ASTM D3702 |
| Reciprocating Drive | Ball-on-flat, pin-on-flat, ring-on-sleeve | 0 – 60 Hz (20 Hz @ 25 mm, 40 Hz @ 12.5 mm, 60 Hz @ 2 mm) | Adjustable stroke | ASTM G119, ASTM G203, ASTM G204, ASTM G206 |
| Block-on-Ring Drive | Block-on-ring wear testing | 0.1 – 5,000 rpm | Torque up to 5 Nm | ASTM G77, ASTM D3704, ASTM D2981 |
| Linear Drive | Scratch, indentation, low-speed friction | 0.002 – 10 mm/s | Stroke up to 120 mm | ASTM G174, ASTM G133 |
在线联系供应商
Other supplier products
 |
Catheter Burst Pressure Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The catheter burst pressure tester is a key device used to evaluate catheter perfo... |
 |
fabric strength meter - lab instrument | Compliance Standards Chinese StandardsInternational Standards GB/T3917.2/3/4/5 ISO3303 FZ/T01030 ASTM D434 FZ/T60006 ASTM D496... |
 |
Flat-Panel Air-Cooled Xenon Lamp Weathering Test Chamber | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Flat-Panel Air-Cooled Xenon Lamp Weathering Test Chamber employs xenon arc lamps c... |
 |
Walk-in High Low Temperature and Low Pressure Test Chamber | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheWalk-in High/Low Temperature and Low Pressure Test Chamberis a precision enviro... |
 |
Transmission Fluid Anti-Shudder Friction Tester GB/T 11118 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Passenger Vehicle Automatic Transmission Fluid Anti-Shudder Friction Tester is... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
