Bench-top Strength Tester for Lead - end of Photovoltaic Modules
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Strength Tester for Lead-End of Photovoltaic Modules is designed to evaluate the mechanical integrity and tensile strength of PV module connectors and leads. It ensures the durability and reliability of electrical connections under standardized loading conditions, supporting quality control, R&D, and compliance verification for photovoltaic modules.
Application
(1) Mechanical testing of MC4. H4. and custom PV module connectors
(2) Lead-end tensile strength verification for 72-cell and large-format modules
(3) Evaluation of junction box durability under repeated thermal cycling
(4) R&D testing for module design optimization
(5) QC inspection in manufacturing lines to ensure IEC 61215-2 compliance
(6) Failure analysis for IV curve correlation and connector degradation studies
Standards
(1) IEC 61215-2:2016 – Test Requirements for Electrical and Mechanical Components of Terrestrial PV Modules
(2) CE Certification (Conformité Européenne)
Features
(1) Motorized Tensile Stage: Adjustable 0–500 mm/min with real-time force-displacement graphing
(2) Dynamic Force Feedback: 0.1 N resolution load cell with peak force memory
(3) Self-Calibrating System: Auto-linearity and tare checks before each test
(4) Quick-Change Fixtures: Compatible with MC4. H4. and custom PV connectors
(5) User-Centric Interface: 7” touchscreen HMI with preloaded IEC 61215-2 test sequences
(6) Durable Construction: Rust-resistant 304 stainless steel frame with epoxy coating
(7) Automated Testing: Programmable load profiles simulating long-term mechanical stress
(8) Safety Systems: Emergency shutoff and overload protection at 5 kN
Parameters
| Parameter | Specification |
|---|---|
| Test Area | 2.000 mm × 1.000 mm (customizable) |
| Force Range | 0–5.000 N (5 kN capacity) |
| Force Resolution | 0.1 N (10 gf) |
| Speed Accuracy | ±1% of setpoint |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Dimensions | 2.200 mm (W) × 1.200 mm (D) × 1.800 mm (H) |
| Weight | 250 kg (net) |
在线联系供应商
Other supplier products
 |
Helmets Vertical SpacingInfrared - positioning Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet vertical spacing infrared positioning tester is a specialized instrument used to... |
 |
Xenon Lamp for Atlas Weatherometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction： Ci 3000-5000 4 thousand hours xenon lamp tester spare package, allows your d... |
 |
CE Certified Compression Tester G5 for Quality Control and R&D Applications | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6669-2011 — Test methods for compression properties of ... |
 |
Photovoltaic module damp heat test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical a... |
 |
Backsheet bonding strength tester for solar modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The tester is designed to comply with international and national standards: (1)... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
