Crash Test Dummy (Chinese Anthropometric Data)
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Crash Test Dummy is designed based on Chinese anthropometric data and represents an average adult male (50th percentile). Its structure and functionality are similar to international 50th percentile dummies, featuring human-like form and biomechanical responses. It can serve as a surrogate for humans in frontal crash testing, measuring acceleration, force, moment, and displacement at key body regions including the head, neck, thorax, pelvis, thighs, knees, and lower legs. This dummy supports occupant safety research and injury analysis.
Application
The Crash Test Dummy is primarily used for:
(1) Frontal crash occupant protection testing;
(2) Verification of seat and seatbelt restraint systems;
(3) NCAP and new car assessment crash tests;
(4) High-repetition research and laboratory crash testing;
(5) Vehicle occupant injury analysis and biomechanics research;
(6) Performance evaluation of occupant safety systems in aerospace, rail, and other transport applications.
Standards
(1) GB/T 11551 – Protection of occupants in frontal and side collisions
(2) GB 14166 – Motor vehicle seat belts and restraint systems
(3) ISO 9790 / ISO/TR 9790 – Road vehicles – Side impact dummy – Evaluation method
(4) FMVSS 208 – Occupant crash protection
(5) FMVSS 214 – Side impact protection
(6) UNECE R94 – Frontal collision protection
(7) UNECE R95 – Lateral collision protection
(8) Euro NCAP – Frontal and side impact test protocols
Parameters
Dimensional Data
| No. | Item | Dimension (mm) |
|---|---|---|
| A | Sitting height | 872.1 ±5.1 |
| B | Shoulder pivot height | 518 ±7.6 |
| C | H-point height (reference) | 98 ±2.5 |
| D | H-point to seatback (reference) | 115 ±2.5 |
| I | Shoulder to elbow length | 295 ±7.6 |
| K | Hip to knee length | 565 ±12.7 |
| L | Leg bent height | 421 ±12.7 |
| M | Knee pivot to floor height | 480 ±7.6 |
| P | Foot length | 265 ±7.6 |
| R | Foot width | 104.2 ±7.6 |
| V | Maximum shoulder width | 423 ±7.6 |
| W | H-point hip width | 341.6 ±7.6 |
Mass Distribution
| Component | Mass (kg) |
|---|---|
| Head | 4.2 ±0.05 |
| Neck | 1.3 ±0.05 |
| Upper torso (including chest skin, neck to spine box base) | 14.7 ±0.35 |
| Lower torso (including femur and lumbar adapter) | 19.54 ±0.35 |
| Thighs (left/right) | 5.3 ±0.1 |
| Lower legs (left/right, including feet) | 5.3 ±0.15 |
| Upper arms (left/right) | 1.5 ±0.1 |
| Lower arms/hands (left/right) | 1.6 ±0.1 |
| Total dummy weight | 67.14 ±1.18 |
Sensor Configuration
| Location | Sensor | Channels |
|---|---|---|
| Head | Accelerometer | 3×1 |
| Upper neck | Gyroscope | 3×1 |
| Thorax | 6-channel load cell | 1×6 |
| Thorax | 6-channel load cell | 1×6 |
| Pelvis | Accelerometer | 3×1 |
| Thigh | Displacement sensor | 1×1 |
| Knee | 5-channel load cell | 1×5 |
| Upper tibia | 6-channel load cell | 1×6 |
| Lower tibia | Accelerometer | 3×1 |
| Foot | 6-channel load cell | 2×6 |
在线联系供应商
Other supplier products
 |
ASTM Fire Performance Standards for Insulation Materials | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Thermal insulation material smoldering test furnace is a performance test dev... |
 |
OEM Pipe Drop Hammer Tester Supplier China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 3127. ASTM D2444. DIN-EN 744. BS-EN 1411 Product features The... |
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Si... |
 |
Infusion Pump Flow Rate Tester ISO & FDA Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Pump Flow Rate Tester is specifically designed for testing the f... |
 |
Bag lifting fatigue testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
