Cable and fiber optic cable line integrity combustion testing machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Cable and Fiber Optic Cable Line Integrity Combustion Testing Machine is designed to evaluate the fire resistance and circuit integrity of cables and optical fibers under extreme flame conditions. It provides precise control over flame temperature, real-time monitoring, and modular testing capabilities, ensuring accurate compliance with international fire safety standards.
Application
This device is used for testing cables and optical fibers that are required to maintain circuit integrity when subjected to a flame with a temperature of at least 750°C (with controlled heat output) during a separate fire test.
Standard
GB/T19216.21-2003：Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0.6/1.0 kV
IEC60331-21：Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0.6/1.0 kV
GB/T19216.23-2003：Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
IEC60331-23：Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
GB/T19216.25-2003：Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
IEC60331-25：Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
Feature
Modular Design: The equipment features a modular combustion chamber design, equipped with a Venturi mixing burner and a gas fuel system. Flame temperature is precisely controlled via dual flow meters.
Multiple Test Modes: The equipment supports fire resistance performance verification of AC 1000V/3A lines and can simulate complex environments such as vibration and water spray.
Real-time Monitoring: The equipment provides quantitative data for cable fire resistance performance evaluation by real-time monitoring of the current on/off status of the cables.
Standard Compliance: The equipment complies with GB/T19216 and IEC60331 series standards, ensuring the scientific accuracy and reliability of the tests.
High-Efficiency Combustion Device: The equipment utilizes a ribbon-type propane burner with staggered nozzle arrangement and a sophisticated design to meet the testing needs of samples with different wire diameters.
Parameters
| Description | Details |
|---|---|
| Combustion chamber design | The combustion chamber is formed as a whole cube by fixing appropriate materials on angle iron supports. |
| Inner dimensions | 3m x 3m x 3m, totaling 27 cubic meters. It can be either a brick - wall structure or a steel - plate structure, subject to customer choice. |
| Sample holder | The sample is supported by two or three metal rings with an inner diameter of approximately 150mm. |
| Combustion device | |
| - Burner | A band - type propane gas burner with a Venturi mixer, having a nominal length of 500mm and a width of 15mm. |
| - Flow meters | Air flow meter: 80L/min; Propane flow meter: 5L/min. |
| - Burner control system components | Pressure - regulating valve, piezoelectric igniter, flame - out device, temperature - controlling thermocouple, gas source (to be provided by your company), regulating valve, ignition device, gas pipeline, flow meter, Venturi mixer, burner, ball valve, air pipeline, compressed air cylinder (to be provided by your company). |
| - Timer | Can be set arbitrarily from 0 to 99.99s/m/h. |
| - Ignition device | Automatic ignition. |
| - Temperature controller | Composed of two temperature - monitoring sections, with a temperature range that can be set arbitrarily from 0 to 1000℃. |
| Circuit load | |
| - Test transformers | Three 3000VA transformers. |
| - Test voltage | AC1000V. |
| - Test current | 3A. |
在线联系供应商
Other supplier products
 |
Fabric Negative-ion Concentration Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fabric Negative-ion Concentration Testers typically detect the amount of nega... |
 |
ISO / ECE Standard Seat Belt Locking Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Car Seat Belt Locking Performance Tester is a professional testing system... |
 |
Computer-Controlled Intramedullary Nail and Bone Screw Torque Testing System | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)YY/T 0591-2011: Chinese standard specifying torsion testing met... |
 |
Mask respiratory resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Mask & Respirator Breathing Resistance Tester Respirator Breathing Resistance Tester i... |
 |
Fabric thickness tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Fabric thickness tester mainly used to measure the thickness of the fabric, suitable for le... |
Same products
 |
Laser Cutting Machines | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
