Car seat center of gravity measuring tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Car Seat Center of Gravity Measuring Tester is a precision testing instrument used to determine the center of gravity position of automotive seats and seat assemblies. By accurately measuring mass distribution, the system provides reliable data to support seat structural design, safety evaluation, and vehicle-level balance optimization.The tester is suitable for complete seats, seat frames, and partially assembled seat structures, and is widely applied in R&D verification, quality control, and compliance testing within the automotive seating industry.
Application
(1) Center of gravity measurement of complete automotive seats, including driver seats, front passenger seats, and rear seats.
(2) Testing of manual seats, power-adjustable seats, and seats with memory adjustment systems.
(3) Measurement of seats equipped with integrated functional modules such as airbags, heating systems, ventilation units, and massage components.
(4) Center of gravity determination for seat frames and semi-assembled seat structures during product development and prototype validation.
(5) Comparative analysis of center of gravity distribution for different seat designs, materials, or structural configurations.
(6) Evaluation of center of gravity variation caused by additional trim parts, covers, or accessory modules.
(7) Verification of lightweight seat designs to support vehicle mass reduction and balance optimization.
(8) Quality control inspection of center of gravity consistency during mass production.
(9) Incoming inspection and supplier evaluation of seat assemblies and seat sub-components.
(10) Support testing for vehicle-level mass distribution studies and dynamic performance analysis.
(11) OEM validation testing and third-party laboratory measurement of seat balance characteristics.
Standards
(1) GB/T 15084 – Measurement methods for automotive seat center of gravity (if applicable).
(2) ISO 7250 – Basic human body measurements for technological design (reference for mass distribution analysis).
(3) ISO 5353 – Earth-moving machinery — Seat index point (reference methodology for seat positioning and mass distribution).
(4) OEM internal standards and enterprise technical specifications.
Note: Applicable standards may vary depending on regional regulations and specific OEM requirements.
Features
(1) High-precision measurement system for accurate determination of seat center of gravity position.
(2) Adjustable measurement range to accommodate different seat types, sizes, and configurations.
(3) Supports multiple test methods, including drop method and horizontal method, to meet OEM and laboratory requirements.
(4) High load-bearing capacity suitable for standard automotive seat weights.
(5) High angular resolution ensures precise calculation of center of gravity coordinates.
(6) Rigid aluminum alloy frame combined with suspension weighing structure provides excellent stability and repeatability.
(7) Real-time data acquisition and calculation for efficient test evaluation.
(8) Stable mechanical structure with necessary safety protection ensures reliable and secure operation.
Parameters
| Parameter | Specification |
|---|---|
| Measuring Range | Adjustable, suitable for various automotive seat types |
| Measurement Accuracy | ≤ ±1% (typical, depending on configuration) |
| Test Methods | Drop method, horizontal method, OEM-specified methods |
| Maximum Load Capacity | Suitable for standard automotive seat weights |
| Angular Resolution | High-resolution angle detection |
| Structural Design | Aluminum alloy frame, suspension weighing system |
| Data Acquisition | Real-time measurement and calculation |
| Power Supply | According to laboratory or customer requirements |
| Safety Protection | Mechanical stability design and operational safety protection |
在线联系供应商
Other supplier products
 |
Custom garment shielding performance testing system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The testing system supports compliance with the following standards: GB 23463-2... |
 |
Safety Footwear Compression Puncture meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test purpose Measure the compression resistance of the shoe head cover and the puncture re... |
 |
Equipment for Overcharge, Short Circuit, and Thermal Runaway | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The pressure vessel complies with the following standards: (1) UL 9540A:2025 &n... |
 |
ISO 10555 catheter burst pressure tester manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Burst Pressure Tester uses the positive pressure method and is d... |
 |
Coating abrasion resistance test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The determination of scratch resistance of the coating is very simil... |
Same products
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
