Flame Penetration Fuel Test System for Thermal and Acoustic Insulation Materials | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Flame Penetration Fuel Test System for Thermal and Acoustic Insulation Materials is a dedicated fire testing platform designed to evaluate flame penetration behavior, combustion performance, and thermal response of aerospace insulation materials under controlled aviation fuel fire exposure. The system integrates the FAA-approved NexGen aviation fuel burner with a specialized flame penetration test apparatus and a dynamic loading motion system, enabling realistic simulation of aircraft fire scenarios while accurately controlling and monitoring fuel and air parameters. The modular design supports both current testing requirements and future FAA technical upgrades.
Application
This system is applicable to aviation fuel fire testing of a wide range of aerospace materials, particularly those used in aircraft cabin structures and thermal management systems, including:
Thermal insulation materials
Acoustic insulation materials
Composite sandwich panels
Cabin wall panels
Ceiling liners
Interior partitions
Fire barrier layers
Multi-layer insulation assemblies
The NexGen burner provides standardized aviation fuel flame exposure, while the configured flame penetration apparatus enables direct assessment of whether flames can penetrate insulation layers under high-temperature conditions.
Standards
The system is compatible with the following international aerospace fire testing standards:
BSS 7387 – Flame spread and combustion behavior of aerospace materials
AITM 2.0056 – Heat release rate measurement of aerospace materials using cone calorimeter
FAR Part 25 Appendix F Part VII – Heat release and fire performance requirements for aircraft cabin materials
Parameters
| Item | Specification |
|---|---|
| Overall dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm |
| System weight | 150 kg |
| Power requirement | 220 V, 10 A |
| Operating temperature | 10°C to 35°C |
| Fuel type | Aviation kerosene |
| Air supply | Minimum 120 PSI compressed air |
| Flame temperature capability | ≥ 2000 ± 50 ℉ |
| Heat flux output | ≥ 10.6 W/cm² |
| Temperature control bath | ≥ 2 × 0.14 m³ |
在线联系供应商
Other supplier products
 |
Burning Manikin System | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Burning Manikin System is primarily applied in the following areas: Fire Envi... |
 |
Shoe Abrasion Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The whole shoe wear testing machine is used to test the wear resistance of soles a... |
 |
Molten Metal Splash Impact Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Projections of molten metal drops at a point on a vertical oriented test specimen ... |
 |
byk-gardner scrub abrasion tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Wet Abrasion Scrub TesterIntroductionThe pa... |
 |
Industrial Dry Cleaning Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-p... |
Same products
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: 868255 | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
