Large-Area LED Solar Simulator 3A+
Getaquote：
Whats/App: +86 181 0160 0864
TheLarge-Area LED Solar Simulator 3A+is designed to provide a controllable, repeatable, and standardized “solar environment” for testing large photovoltaic (PV) modules in laboratory settings. You use this simulator to replicate real solar irradiance across meter-scale areas, allowing comprehensive performance evaluation of PV modules under precise, uniform, and programmable light conditions. Its LED-based system ensures high spectral accuracy, exceptional uniformity, instant response, and long-term reliability, making it suitable for both R&D and production line testing of large-scale photovoltaic products.
Applications
Mass Grading of Large-Size PV Modules: Rapidly test and grade output power at production line end-of-line inspections.
PV Module Research and Development: Evaluate novel modules such as HJT, TOPCon, and perovskite under standardized solar conditions.
PV Module Certification: Facilitate IEC-compliant testing for quality assurance and certification purposes.
Bifacial Module Testing: Simultaneously or independently measure front and rear power generation efficiency.
Agri-PV and Building-Integrated Photovoltaics (BIPV) Testing: Deliver customized testing for specialized PV applications.
Standards
(1) IEC 60904-9 – Photovoltaic Devices: Performance Requirements for Solar Simulators
(2) ASTM E927 – Standard Guide for Laboratory Simulation of Solar Radiation
(3) IEC 60904-3 – Measurement of Photovoltaic Current-Voltage Characteristics
(4) ISO 9060 – Solar Irradiance Measurement and Calibration Standards
(5) IEC 61853 series – Photovoltaic Module Performance Testing under Standard Test Conditions
Features
Unparalleled Uniformity: You achieve extremely high irradiance uniformity across the entire module surface.
Superior Spectral Matching: Multi-channel LED combination ensures accurate reproduction of the solar spectrum, including critical UV and IR bands.
Instant Switching and Flicker-Free Output: Supports millisecond-scale flash testing without warm-up.
Ultra-Long Lifespan and Low Maintenance: LED light sources provide stable output over tens of thousands of hours, reducing operational costs.
Programmable Flexible Spectrum: Independently control wavelength bands to simulate different times, atmospheric conditions, and solar spectra.
Technical Parameters
| Performance Item | Technical Specification |
|---|---|
| Effective Irradiation Area | Up to meter-scale (e.g., 1.2 m × 2.4 m) |
| Irradiance Uniformity | Typically better than ±2% |
| Spectral Matching | Multi-channel LEDs (A+/B+) covering UV, visible, and IR bands |
| Flash Duration | Milliseconds, programmable |
| Switching Time | Instantaneous, flicker-free output |
| LED Lifespan | Tens of thousands of hours |
| Adjustable Spectrum | Programmable to replicate AM1.5G, AM0, and custom solar spectra |
| Cooling System | Liquid or air-based thermal management for high-power LEDs |
| Control System | Intelligent calibration with distributed sensors and software interface |
Accessoriess
(1) High-performance LED array modules
(2) Liquid or air cooling thermal management system
(3) Precision drive and control circuitry
(4) Distributed irradiance sensors for uniformity calibration
(5) Intelligent software platform for test configuration and reporting
(6) Optical diffusers and lenses for uniform illumination
Test Procedures
Mount the PV module or device under test onto the simulator test platform.
Configure the target solar spectrum (e.g., AM1.5G, AM0) and irradiance intensity.
Adjust flash duration, frequency, and uniformity calibration via the software interface.
Activate the LED simulator and monitor real-time irradiance and module response.
Record module electrical output and efficiency parameters.
Analyze results using the software platform and generate standardized test reports.
Complete testing and power down the simulator according to safety procedures.
Conclusion
You use theLarge-Area LED Solar Simulator 3A+to provide a highly uniform, spectrally accurate, and programmable solar environment for large photovoltaic modules. Its LED-based design ensures instant, flicker-free operation with minimal maintenance, while intelligent control systems allow precise calibration, real-time monitoring, and flexible spectral adjustment. The simulator is ideal for R&D, certification, mass grading, bifacial testing, and specialized PV applications such as BIPV and Agri-PV.
在线联系供应商
Other supplier products
 |
VW Heel Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materials sub... |
 |
Puncture Strength Tester STD - NDG5 | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile Strength) S... |
 |
Environmental Stress Cracking Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This instrument is a testing device recommended according to standard requirements... |
 |
Water-cooled Light & Weather Fastness Tester | Water-cooled Light & Weather Fastness Tester Test for color fastness to sunlight of material SI4000 water cooled sunlight fastness tester -The... |
 |
High-Temperature Reciprocating Friction and Wear Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The High-Temperature Reciprocating Friction and Wear Tester is designed for quanti... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
