Drying Rate Tester Heated Plate Method
Get a quote:
Whats/App: +86 181 0160 0864
The Hot Plate Method Fabric Drying Rate Tester is an advanced, automated instrument specifically engineered to determine the drying kinetics of textiles. Designed in strict accordance with the AATCC 201 standard, this device simulates the evaporation of moisture from a fabric surface as it contact-heats against a controlled thermal plate. By integrating high-precision infrared sensors and calibrated airflow systems, you can accurately quantify the drying time and drying rate of high-performance fabrics. This tester provides a critical benchmark for evaluating "moisture-wicking" and "quick-dry" claims, ensuring that functional garments meet the physiological comfort requirements of the end-user.
Applications
The Hot Plate Method Fabric Drying Rate Tester is an automated testing instrument designed to measure the drying rate of textiles in accordance with the requirements of the American Association of Textile Chemists and Colorists (AATCC) Test Method 201.
Standards
AATCC 201-2013 Fabric Drying Rate: Hot Plate Method
FZ/T 01176-2024 Textiles - Determination of Fabric Drying Rate - Hot Plate Method
Features
1. Incorporates high-precision wind speed sensors, infrared temperature sensors, temperature sensors, precision dripping devices, high-accuracy wind speed control units, and fluid dynamics-optimized air ducts.
2. Integrates with computer software to automatically perform fabric drying time and drying rate tests along with comprehensive data analysis, significantly enhancing operational efficiency and measurement accuracy while minimizing human-induced errors.
3. Test software communicates with the main unit via USB port, displaying and saving data as curves and charts for easy analysis and printing. Wide adjustable ranges for wind speed (0.2–4.5 m/sec) and drip volume (0.05–4.5 ml).
4. The hot plate method not only complies with the AATCC 201 testing standard but is also suitable for knitted fabrics or any quick-drying fabrics (excluding fabrics used in socks).
Parameters
| Item | Specifications |
|---|---|
| Air Chamber | Capable of generating 0.2–3 m/sec airflow |
| Heating Plate | 300mm×300mm±1mm |
| Flexible Heating Sheet | 300mm×300mm±1mm |
| Insulation Soft Board | 300mm×300mm±1mm |
| Heating Plate Temperature | 37±0.5°C (with overheat protection) |
| Air Velocity | 0–2.5 m/s±0.1 m/s |
| Infrared Temperature Sensor | 15–50°C±0.1°C |
| Data Transmission | USB data transmission |
| Test Interface | Curves and charts displayed simultaneously |
| Test Report | Automatically saved, easy to print |
| Power Supply | AC 230V, 50Hz/60Hz |
| Overall Dimensions (L×W×H) | 450×320×170 mm |
| Weight | Approximately 45 kg |
Accessories
Standard Configuration:
Temperature recorder, infrared thermocouple probe, fan box, metal plate, cork insulation, micropipette, anemometer, magnetic, plastic or metal strip
Configuration Options:
1. Drying rate tester main unit + software
2. Drying rate tester software
3. Dedicated computer
4. Sample clamping rod
5. USB data cable
Test Procedures
Preparation:Connect the instrument to the power supply. Ensure airflow, heating plate, and infrared sensors are calibrated.
Sample Placement:Position the fabric sample on the heating plate. Ensure consistent contact and sample alignment.
Parameter Configuration:Set target temperature, airflow velocity, and drip volume via the software interface.
Test Initiation:Start the automated test sequence. The system will apply controlled heat and airflow, recording moisture evaporation and drying rate in real-time.
Data Collection:Curves and charts are generated automatically. Save or export results for analysis or reporting.
Completion:Remove the sample after test completion. Power off the device or prepare for the next measurement.
在线联系供应商
Other supplier products
 |
Tibial Tray Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Tibial Tray Fatigue Testing Machine is a specialized device designed to evalua... |
 |
Female Side Impact Dummy | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The 5th Percentile Female Side Impact Dummy is a next-generation biomechanical sur... |
 |
Cookware Scratch Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Cookware Scratch Resistance Tester is designed to evaluate the scratch and wea... |
 |
Carbon Black Dispersion Tester丨Carbon Black Dispersion Analyzer | Scope of application: STD DW1431 plastic carbon black dispersion measurement system is based on a professional image acquisition system and corres... |
 |
Bone Cement Flexural Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Bone Cement Flexural Fatigue Testing Machine is a device used to evaluate the ... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
