Impact Abrasion Resistance Tester
Getaquote:
Whats/App: +86 181 0160 0864
The Protective Clothing Impact Abrasion Tester is designed to evaluate the impact abrasion resistance of motorcycle protective clothing. It simulates abrasion damage caused by impact when riders travel on gravel or rough road surfaces, allowing you to objectively assess the protective performance of garments under severe riding conditions.
Application
You use this tester to evaluate the abrasion resistance of motorcycle protective clothing under impact conditions.
It is suitable for testing motorcycle jackets, pants, protective suits, reinforced fabric panels, elbow and knee protection areas, and other protective components used in motorcycle rider apparel.
Standards
The Protective Clothing Impact Abrasion Tester complies with the following standard:
(1) GB/T 24278-2019 Protective clothing for motorcycle riders
Parameters
| Item | Specification |
|---|---|
| Control System | Industrial-grade PLC |
| Operation Interface | 7-inch color touchscreen, Chinese/English |
| Operation Mode | Full touchscreen operation, programmable test settings |
| Printer | Built-in printer |
| Belt Speed | 8 m/s |
| Belt Hardness | Grit OP60 |
| Abrasion Area | 1963 mm² |
| Applied Force on Specimen | 49 N |
| Net Pressure on Specimen | 25 kPa |
| Drop Height | 50 mm |
| Specimen Holder | Diameter Φ75 mm |
| Cleaning Brush | Diameter Φ200 mm, polypropylene bristles, 0.2 mm thickness, 45 mm free length |
| Software Interface | USB interface, data reading and PC connection |
Features
You can set test parameters directly through the intelligent control system.
The tester performs automatic cyclic testing after parameter input, reducing manual intervention.
You can pause the test at any time to observe specimen abrasion by opening the safety door.
A servo drive system ensures fast response, stable speed, and no speed fluctuation during testing.
The system provides stable and repeatable test results for impact abrasion evaluation.
Accessories
(1) Main testing unit
(2) User manual
(3) Certificate of conformity
(4) Warranty card
(5) Delivery confirmation document
(6) Nameplate
(7) Power cable
(8) Wrench set
(9) Product brochures
Test Procedures
You fix the specimen securely in the specimen holder.
Set test parameters such as speed and test conditions via the touchscreen interface.
Start the test, and the specimen is subjected to impact abrasion through controlled motion.
During the test, you may pause operation to inspect abrasion damage if required.
After completion, test data can be printed or transferred to a computer for analysis.
Maintenance Information
You should regularly clean the abrasion belt and cleaning brush to ensure consistent test conditions.
Mechanical and drive components should be inspected periodically for stable operation.
Electrical connections and the control system should be checked to prevent faults.
Routine calibration and inspection help maintain long-term accuracy and reliability.
在线联系供应商
Other supplier products
 |
Solid Energetic Materials Stability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Solid Energetic Materials Stability Tester monitors the changes in gas pressur... |
 |
Ross Flex Tester | Ross Bending Machine | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sole of rubber, PU, PVC, TPR foam and other materials... |
 |
Seatbelt Fabric Pilling Tester | Get a quote： Whats/App: +86 181 0160 0864 The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments caused by s... |
 |
Dental Implant Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Dental Implant Fatigue Testing Machine is a specialized device used to evaluat... |
 |
Micron Tester | Get a quote: Whats/App: +86 181 0160 0864 The Micron Tester is a precision instrument designed for determining the micronaire value of cotton, a ... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
