Textile Far Infrared Radiation Temperature Rise Tester
Getaquote:
Whats/App: +86 181 0160 0864
The Textile Far Infrared Radiation Temperature Rise Tester is a high-precision analytical instrument specifically engineered to evaluate the far-infrared thermal performance of functional textiles. By simulating infrared radiation exposure and monitoring the resulting thermal response, this tester allows you to determine the temperature rise efficiency and heat-retention capabilities of advanced materials. It integrates a standardized 150W radiation source with high-speed thermal sensors to provide you with objective, repeatable data on how a fabric interacts with infrared energy—a critical metric for verifying the therapeutic or "self-heating" claims of modern performance textiles.
Applications
Textile Far Infrared Radiation Temperature Rise Tester is used for various textiles including fibers, yarns, fabrics, nonwovens, and their products. It employs temperature rise testing to determine the far-infrared performance of textiles.
Standards
GB/T 30127-2013 ：“Textiles - Testing and Evaluation of Far-Infrared Properties” Clause 4.2 Test Method for Far-Infrared Radiation Temperature Rise
T/CAS 115.5-2021:Health Care Textiles — Part 5: Far Infrared
Features
1. Features an industrial-grade color touchscreen display and control system with an intuitive human-machine interface that is simple to use and enhances operational convenience.
2. Utilizes an automatic measurement mode, enabling one-touch initiation to automatically complete the testing process.
3. Incorporates high-precision sensors capable of rapid response and accurate measurement of current temperature.
Parameters
|
Parameter Item |
Parameter Value |
|
Specimen Holder |
500mm distance from radiation source to specimen surface |
|
Radiation Source |
Main wavelength 5μm~14μm, radiation power 150W |
|
Specimen Irradiation Area |
φ60~φ80mm |
|
Temperature Range & Accuracy |
15℃~50℃, ±0.1℃ precision, ≤1s response time |
|
Specimen Types |
|
Accessories
(1) Standard Specimen Disk: For flat fabric samples.
(2) Square Metal Frame Fixture: Specialized for yarn specimens.
(3) Open Cylindrical Container: For loose fiber testing.
(4) High-Precision Temperature Probe: Rapid-response contact or non-contact sensor (model dependent).
(5) Integrated Thermal Printer: For immediate generation of test reports.
(6) Power Cable and Calibration Certificate.
Test Procedures
I. Power-Up and Setup
1. Connect Power:
Turn on the instrument's power switch to enter the setup interface.
2. Parameter Settings:
Irradiation Power: Typically set to 150W.
Test Duration: Generally 30 seconds.
Test Cycles: Set according to standard requirements, e.g., 5 cycles.
II. Sample Installation
1. Fixture Selection:
Thin Samples: Install thin-sample fixture and tighten the nut.
Thick Samples: Place directly onto the disk, aligning with the center.
2. Sample Placement:
Ensure the test line is positioned at the center point.
Place the sample face up and secure the edges with a ruler.
III. Test Procedure
1. Preheat: Click “Turn on Light” to preheat the instrument.
2. Start Test:
Click the test interface; timing starts for 30 seconds.
Observe temperature rise value, initial temperature, and final temperature.
Automatic Result Display: Data appears automatically upon test completion.
IV. Data Processing
Data Retrieval: Click Details to view test results.
Report Printing: Click Print to generate the test report.
在线联系供应商
Other supplier products
 |
Helmet Xenon Aging Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet xenon lamp aging tester is a device that simulates the damage caused by... |
 |
Automotive Coating Scratch Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automotive Coating Scratch Tester is a precision instrument designed to evalua... |
 |
Nasal Oxygen Cannula Tester YY/T 1543 | Introduction The Nasal Oxygen Tube Tester plays a crucial role in the medical field. The following is a detailed introduction to its main uses, co... |
 |
Air Permeability Tester | Get a quote:Whats/App: +86 181 0160 0864 Air Permeability Tester of textile fabrics complies with ASTM D737. ISO 9237/7231. BS 5636. etc. It is ... |
 |
PV Light Induced Degradation (LID) Testing Chamber | Get a quote： Whats/App: +86 181 0160 0864 The Light Decay Test Chamber is a high-precision indoor exposure system specifically engineered for the... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
