Carpet Abrasion Tester
Get a quote：
Whats/App: +86 181 0160 0864
The Carpet Abrasion Tester is designed to evaluate the wear resistance of carpets by measuring material loss under controlled friction conditions. You can use this instrument to simulate real abrasion during use and determine the durability and service life of carpet materials.
Application
You can use this tester for:
Residential and commercial carpets
Textile floor coverings and rugs
Carpet tiles and backing materials
Quality control of carpet abrasion resistance
R&D testing for material durability and wear performance
Standards
The instrument complies with relevant international standards:
(1) BS EN 1813:1998 – Determination of abrasion resistance of textile floor coverings
(2) PD 6527:1990 Method 17 – Carpet abrasion testing method
Parameters
| Parameter | Specification |
|---|---|
| Dimensions (W×D×H) | 330 × 330 × 550 mm |
| Power | 375 W |
| Consumables | SM25 Abrasive Cloth; Polyester Abrasive Cloth |
| Accessories (Consumable) | Adhesive Backing; Carpet Sample Holder |
Features
You can evaluate carpet abrasion resistance using standardized friction methods.
Suitable for small sample weight loss testing after abrasion cycles.
Provides fast testing, typically completing each sample within 30 minutes.
Widely used in industrial carpet quality control applications.Accessories
(1) Carpet Sample Holder
(2) SM25 Abrasive Cloth
(3) Polyester Abrasive Cloth
(4) Adhesive Backing
Test Procedures
Prepare a circular carpet sample with a diameter of 38 mm.
Fix the sample and abrasive material onto the rotating shafts.
Apply the specified load to achieve a pressure of 0.56 kg/cm².
Set the required number of abrasion cycles on the counter.
Start the test; both shafts rotate at the same speed and direction to generate friction.
After testing, measure the weight loss after 5000 cycles or record cycles until the backing is exposed.
Maintenance Information
Replace abrasive cloth regularly to maintain consistent test conditions.
Keep rotating shafts and fixtures clean and properly aligned.
Inspect load system and counters periodically for accuracy.
Ensure proper lubrication of moving parts to reduce mechanical wear.
Conclusion
The Carpet Abrasion Tester provides reliable and efficient evaluation of carpet wear resistance. You can use it to assess material durability, optimize product performance, and ensure compliance with international standards.
在线联系供应商
Other supplier products
 |
Automotive Wire Hot Water（Salt Water）Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Hot Water (Salt Water) Resistance Tester is engineered for long-term (over 14 days)... |
 |
Cabin Air Filter Test System（Gas Adsorption） | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Filter Test System for gas adsorption/desorption of air filters for passenger ... |
 |
Rapid Crack Propagation Tester / RCP Tester | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid c... |
 |
Automotive Wire Scratch Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Scratch Resistance Tester is designed to evaluate the abrasion resistance and durab... |
 |
Full Notch Creep Tester / Full Notch Creep Test FNCT | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
