Geomembrane Stress Crack Resistance Tester
Get a quote：
Whats/App: +86 181 0160 0864
The Geomembrane Stress Crack Resistance Tester is designed to evaluate the environmental stress cracking resistance (ESCR) of high-density polyethylene (HDPE) geomembrane materials under accelerated conditions. This geomembrane stress crack resistance tester applies a constant load to notched specimens immersed in a controlled surfactant solution, allowing accurate determination of crack initiation and failure time.
Application
(1) HDPE geomembranes used in landfill liners and environmental protection systems
(2) Geosynthetic materials used in water conservancy and drainage engineering
(3) Anti-seepage liners in mining, chemical, and waste containment applications
(4) Quality control testing of geomembrane production
(5) Research and durability evaluation of polymer materials under stress cracking conditions
Standards
(1) ASTM D5397-20 (Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes)
(2) EN 14576:2005 (Geosynthetics – Determination of resistance to environmental stress cracking)
Parameters
| Parameter | Specification |
|---|---|
| Test Method | Constant load stress cracking (notched specimen) |
| Number of Stations | 20 samples simultaneously |
| Bath Temperature | 50°C (controlled) |
| Temperature Control | Solid-state temperature controller |
| Loading Method | Lever system with weight container |
| Timing System | Individual digital timers |
| Bath Material | Stainless steel |
| Dimensions | 1600 × 1400 × 520 mm |
| Power Supply | AC 220–240V, 50 Hz |
| Power | 2.5 kW |
Features
(1) Simultaneous testing of up to 20 specimens to improve efficiency
(2) Stainless steel bath and fixtures for corrosion resistance
(3) Solid-state temperature control ensures stable test conditions
(4) Circulation pump maintains uniform bath temperature and concentration
(5) Low liquid level protection automatically stops heating and pumping
(6) Bath cover reduces evaporation during long-duration testing
(7) Movable weight container for consistent load application
(8) Individual digital timers for accurate recording of failure time
(9) Motor-driven bath lifting mechanism for convenient operation
Accessories
(1) Notching device for specimen preparation
(2) Weight containers with lead weights
(3) Specimen holding fixtures
(4) Operation manual
Test Procedures
(1) Prepare dumbbell-shaped specimens and introduce a notch using the notching device
(2) Mount the specimens onto the test positions
(3) Apply constant load through the lever and weight system
(4) Immerse the specimens in the surfactant solution bath at 50°C
(5) Start the individual timers for each specimen
(6) Monitor and record the time to crack initiation or failure
(7) Analyze the stress crack resistance based on recorded data
Maintenance Information
(1) Regularly clean the bath and remove any residue after testing
(2) Check the circulation pump and heating system for proper operation
(3) Inspect liquid level protection devices to ensure safety
(4) Verify the accuracy of timers and loading system periodically
(5) Maintain proper surfactant solution concentration and replace when necessary
Conclusion
The Geomembrane Stress Crack Resistance Tester provides a reliable and standardized method for evaluating the stress cracking performance of HDPE geomembranes. It is suitable for laboratory testing, quality control, and research applications requiring precise and repeatable results.
在线联系供应商
Other supplier products
 |
Bone Screw Pull-out Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk A Bone Screw Pull-out Tester is a specialized testing device used to measure the p... |
 |
AATCC Viewing Board | Getaquote: Whats/App: +86 181 0160 0864 The AATCC Viewing Board is a laboratory instrument designed to evaluate the visual appearance of textile ... |
 |
Autocatalytic Decomposition Temperature Tester with Thermal Insulation | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Autocatalytic Decomposition Temperature Tester with Thermal Insulation (Adiaba... |
 |
Scrub Abrasion Tester | Abrasion and Washability Tester | T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi... |
 |
Tensile and Shear Tester STD - FB1 - A | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Tensile and Shear Tester analyzes hand movements-referred to as "tensile"and "... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
