Bubble Leak Tester | ASTM ISO Testing Machine
Get a quote：
Web: qinsun-lab.com
Whats/App: +86 185 0176 3615
The Bubble Leak Tester utilizes a positive pressure testing principle and is suitable for the quantitative measurement of sealing strength, heat seal quality, burst pressure, and leakage performance of various sealed packages; it can also be used for the quantitative measurement of the sealing performance of various plastic tamper-evident caps, inflatable packaging, ointment tubes, and medical packaging. Simultaneously, it can perform analysis and testing of various bottle body sealing properties, compressive strength, and burst resistance.
Standards
YY/T 0681.5 - 2010：Test methods for sterile medical device package - Part 5: Detecting gross leaks in medical packaging by internal pressurization (bubble test)
Technical Parameters
| Parameter | Specification |
|---|---|
| Testing Range | Suitable for the gross leak testing under internal pressure of various packages, and the testing pressure range can be customized according to requirements. |
| Testing Principle | Based on the positive-pressure testing principle, a certain pressure is applied to the inside of the package, and it is determined whether there is a gross leak by observing whether bubbles are generated on the outside. |
| Automated Control | Equipped with a PLC industrial control program, which can accurately control the pressure and time, and automatically complete the experiment after setting the test pressure and time. |
| Ease of Operation | With a touch-screen operation interface, it is highly user-friendly and simple to operate. |
| Testing Accuracy | The testing error is usually within ±1%, ensuring the accuracy of test results. |
| Constant Pressure Time | Can be set through the touch-screen, with a range of 1 - 9999 seconds. |
| Air Source Interface | Usually equipped with a Φ6mm polyurethane tube and an 8mm interface for easy connection to the air source. |
| External Dimensions | May vary depending on the model but are usually compact; e.g., some models: 420mm(L)×290mm(W)×280mm(H) |
在线联系供应商
Other supplier products
 |
Moisture Management Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Applications: TheMoisture Management Tester (MMT)is an equipment to measure the d... |
 |
Geosynthetics Bursting Strength Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The geotechnical synthetic material comprehensive testing instrument is used for t... |
 |
High Temperature Creep Test Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The High Temperature Creep Test Machine is designed for evaluating the long-term c... |
 |
Thermostat testing device | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com TheThermostat Testing Deviceis a dedicated system for life cycle testing of snap-a... |
 |
VW Heel Abrasion Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor c... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
