ASTM D3574 compliant sponge compression hardness tester
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam (such as backrest, seat cushion foam, etc.)， and accurately measure the compression hardness of each foam part of the seat.
Application
Measurement of tensile strength, tear strength, elongation at break, indentation hardness, and compressive stress of polyurethane foam plastics.
Standards
ISO 2439: Flexible cellular polymeric materials — Determination of hardness (indentation technique)
ISO 3386-1: Polymeric materials, cellular flexible — Determination of stress-strain characteristic in compression
ASTM D3574:Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams
Accessoriess
1. Transmission System:
Typically, the reduction gear unit of the main machine's transmission system uses a worm gear reducer, but it has inherent drawbacks such as large backlash and slow response speed. Our company's WSM series products utilize an AC servo motor from a Japanese (or other imported) company, which drives a ball screw through a circular arc synchronous belt pulley reduction system. This transmission system has no backlash and offers a fast response speed, thus ensuring the control accuracy of test force, deformation, and displacement.
2. Guiding System:
In addition to the ball screw guidance, the moving crossbeam of the testing machine is also guided by two columns (in conjunction with linear bearings). When the moving crossbeam is subjected to force, the special double-guide mechanism makes the moving crossbeam act as a fixed beam structure. Therefore:
a) The axial and lateral stiffness of the testing machine are greatly improved, with axial stiffness reaching 2 × 10⁸ N/m;
b) The oscillation of the moving crossbeam and the vibration generated during sample fracture are reduced.
Fully Digital Measurement and Control System
Fully Digital Measurement Controller
Technical Parameters
| Technical Parameter | Specifications |
|---|---|
| Control mode | Touch screen control |
| Induction mode | Precision load element |
| Capacity | 200kg |
| Unit switch | Kg, N, LB |
| Pressure plate | Diameter 200mm, bottom rounded R1mm |
| Lower platform | 420×420mm, porosity diameter 6mm, spacing 20mm |
| Maximum stroke | 75mm |
| Test speed | 100±20mm/min |
| Drive power source | Servo motor |
| Transmission mode | Precision ball screw |
| Power supply | Single-phase, 220V, 50Hz/60Hz, 2.5A |
| Machine weight | 160kg |
Features
1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.
2. automatic return: after the sample is broken, it will automatically return to the initial position.
3. change the speed: The machine can change the test speed arbitrarily according to different samples.
4. indicating value verification: the system can achieve the accurate calibration of force value.
5. control method: According to the test needs can choose the test force, test speed, displacement and other test methods.
在线联系供应商
Other supplier products
 |
Textile Blanket Flammability Tester Complying with 16 CFR Standards | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features Stainless steel body design Exter... |
 |
Architectural panel smoke toxicity tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Building material smoke toxicity testing equipment is primarily used to evalu... |
 |
Diesel Water Ash Sulfur Testing Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 16332:2018：Diesel engines — Fuel filters — Method for evaluating... |
 |
EN 1822-3 HEPA and ULPA filter testing System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Small HEPA Filter Element Efficiency Testing: Verification of overall effi... |
 |
Model Coin-cell Swelling System for Lithium-ion Battery Research | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ASTM E83 – Standard Test Method for Verification of Line... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
