Stick Slip Test Stand for Material Combinations(G-SSP)
Get a quote：
Whats/App: +86 181 0160 0864
The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate friction-induced stick-slip behavior and squeak noise risk between material pairs under controlled load and motion conditions.
You can use this equipment to measure static friction force, dynamic friction force, coefficient of friction, maximum friction acceleration, and vibration frequency, providing quantitative data for tribological and NVH evaluation.
Application
You can use this test stand to predict friction noise and stick-slip behavior of automotive interior and exterior materials during real use conditions.
It is suitable for the following products and components:
(1) Automotive seat components, instrument panels, door trims, carpets, and interior trim parts
(2) Plastic–plastic, plastic–metal, metal–metal, and composite material friction pairs
(3) Brake pedals, handbrake handles, gear selectors, and tactile control components
(4) Materials with surface treatments, coatings, or layered structures
(5) Material compatibility evaluation to prevent squeak and rattle issues
(6) Tribological performance comparison during material selection and design validation
Standards
(1) VDA 230-206 – Test Method for Evaluation of Friction Noise
(2) BMW PR315 – Friction Noise Evaluation Specification
(3) BMW TL 9169300 – Technical Specification for Friction Properties
(4) VW / Audi / Porsche TL 52064. PV3981 – Friction Noise Testing Standards
(5) Ford L400 – Friction Noise Test Specification
(6) TPJLR-00-230 – Jaguar Land Rover Friction Noise and Tribology Standard
Parameters
| Item | Specification |
|---|---|
| Test Specimen Size | Customized according to customer requirement |
| Normal Load Range | 0–500 N, adjustable |
| Test Stroke | 0–50 mm, adjustable |
| Vibration Frequency | 0–200 Hz, adjustable |
| Static Friction Force Resolution | 0.01 N |
| Dynamic Friction Force Resolution | 0.01 N |
| Maximum Friction Acceleration Resolution | 0.01 m/s² |
| Coefficient of Friction Range | 0–2.0 |
| COF Accuracy | ±0.01 |
| Data Acquisition | Real-time display with curve output |
| Power Supply | 220 V / 50 Hz or 110 V / 60 Hz |
Features
(1) High-precision force and acceleration sensors ensure reliable friction and vibration data.
(2) Supports both static and dynamic friction testing under controlled conditions.
(3) Adjustable load, stroke, and vibration frequency to meet different OEM standards.
(4) Suitable for various material combinations including plastics, metals, and composites.
(5) Real-time data acquisition with force, COF, acceleration, and vibration curves.
(6) Stable mechanical structure with vibration-resistant design for repeatable results.
Accessories
(1) Adjustable specimen clamping fixtures
(2) High-precision force sensor
(3) High-sensitivity acceleration sensor
(4) Test specimens supplied by customer
(5) Control and data acquisition system (PC or PLC based)
(6) Safety enclosure
(7) Standard load weights
在线联系供应商
Other supplier products
 |
Multiplex Sand/Wheel Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Multiplex Sand/Wheel Abrasion Tester is a floor-standing abrasion testing syst... |
 |
Upper Leather Flexing Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Upper Leather Flexing Tester evaluates the flexing endurance and resistance to... |
 |
Environmental Stress Cracking Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This instrument is a testing device recommended according to standard requirements... |
 |
Bag Plastic Buckle Durability Tester - Standard | Product Introduction: It is mainly used to test the service life of plastic plug-ins in luggage accessories. Technical standard: QBT 5247-2018 ... |
 |
Safety Helmets Wearing Stability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmets Wearing Stability Tester is designed to evaluate helmet retenti... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
