Affordable fire protection coating chamber test

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The fire-retardant coating tester (combustion chamber method) is primarily used to test the flame-retardant performance of fire-retardant coatings applied to the surface of combustible substrates under laboratory conditions. According to the GB12441-2018 standard, the test methods include the small chamber method, the large panel method, and the tunnel method. The test results are usually evaluated based on the mass loss during combustion and the charring volume to assess the quality of the fire-retardant coating.

Feature

Complies with national standards: The testing instrument complies with the requirements of GB12441-2018 "Classification and Test Methods for Fire Performance of Decorative Fire-Retardant Coatings," ensuring the accuracy and reliability of the test results.

Compatible with multiple test methods: The equipment is compatible with various test methods, including the small chamber method, large panel method, and tunnel method, meeting different testing needs.

Testing under laboratory conditions: Suitable for testing the fire resistance performance of fire-retardant coatings applied to the surface of combustible substrates under laboratory conditions, using combustion mass loss and charring volume to evaluate the quality of the fire-retardant coating.

Structural design: The equipment has a reasonable structural design, complying with international flame retardant testing standards, ensuring the safety and effectiveness of the testing process.

Wide range of applications: Suitable for determining the flame resistance characteristics and flame resistance time of decorative fire-retardant coatings applied to the surface of combustible substrates, as well as experiments on flame propagation characteristics.

Sample making

1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75 "broadleaf wood plywood", its size is 300mmx150mmx5mm, and the surface of the sample should be smooth and smooth, without joints and other defects.

2. before the test board is coated with fireproof paint, the state should be adjusted to constant at the temperature of 25±1℃ and the relative humidity of 60%——70% (the weight change of 24h interval is not more than 0.1%)。

3. according to the coating ratio of 200——250g/m2 (thick paste coating allows to increase to 500g/m2) to test the fire retardant coating evenly covered on the surface of the test plate and around, when the need for multiple coating, the interval between two times should be 24h.

The finished specimens shall be adjusted to constant weight according to the condition state specified in 2 articles, and ten specimens of each fireproof coating shall be prepared.

Technical parameters

Item	Description
Instrument Structure	Composed of a main control box and a combustion box. The control box is movable, made of electrostatic steel plate (t=1.2mm) with a spray-painted surface for a smooth and aesthetic appearance.
Observation Window	Equipped with a glass window on the front for observing the sample's combustion status at any time.
Burner Material	Made of brass.
Temperature Control System	Digital temperature control system.
Thermocouple Specifications	Outer diameter: 2mm, Accuracy: Class II, Range: 1300℃.
Timer Accuracy	Error not exceeding 1s/h.
Alarm System	Alarms every 15 seconds during the test to remind the operator to record the current combustion status. Combustion duration: 4 minutes.
Gas Source	Liquefied petroleum gas or natural gas.
Rotameter	Adjustable flow rate of combustion gas.
Pressure Regulator	High-precision pressure regulator to adjust the gas pressure to standard requirements.
Power Requirements	AC220(±10%)V/50HZ.
Control System	Relay control system with all electronic components from well-known domestic brands to ensure better machine performance and detection accuracy.
Safety Features	Overload and short-circuit protection for the power supply.
Instrument Dimensions	Approximately 340mm x 230mm x 794mm.
Sample Holder Tilt Angle	Can be tilted 45° ± 2°.
Copper Combustion Cup Specifications	Outer diameter: 24mm ± 0.1mm, Wall thickness: 1mm ± 0.06mm, Height: 17mm ± 0.1mm, Volume: 6mL.
Fuel	Chemically pure grade anhydrous ethanol.

Application

The fire-retardant coating combustion test apparatus (small chamber method) and the fire-retardant coating small sample test furnace are used to conduct combustion tests under laboratory conditions to determine the flame spread performance of fire-retardant coatings applied to the surface of combustible substrates.

Standards

GB 14907—1994:General specifications of fire resistive coating for steel structure

GB 14907—2002:Fire resistive coating for steel structure

ETAG：2006:European Technical Approval Guideline 2006

BS 8202:1992:2:Coatings for fire protection of building elements - Part 2: Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance

Other supplier products

	Aircraft Non-Metallic Material Flammability Tester Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Key Parameters Parameter CategorySpecif...
	vertical flammability test chamber丨vertical flammability tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Configuration and consumables: AUTOMATIC GAS CONTROL, 230V Automatic Gas Control System ...
	High-Precision Multi-Functional Thermal Property Testing System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The platform supports internationally recognized absolute measurement standards,...
	Plastic Smoke Density Tester F313	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the spe...
	ISO 13937-1 Fabric Tear Strength Tester for Textile Laboratories	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Wide test range The tester is equipped with multiple ranges and is used for ...

供应产品

Same products

	不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝	卖方: 863048	产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，...
	E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点	卖方: 863048	迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
	Mini Jewelry Laser Repair System – 60W to 400W Precision Welding	卖方: Beijing JCZ Technology Co., Ltd	The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
	Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal	卖方: Beijing JCZ Technology Co., Ltd	TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
	Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner	卖方: Beijing JCZ Technology Co., Ltd	The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...