Aircraft Material Oil Burner Seat Cushion
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Aircraft Seat Cushion Fuel Burn Test System is a dedicated aviation fire testing platform designed to evaluate the fuel fire performance, flame spread behavior, and combustion characteristics of aircraft seat cushions under controlled aviation fuel fire exposure. The system integrates the FAA-approved NexGen aviation fuel burner with a specialized seat cushion test frame and dynamic motion system, enabling realistic simulation of aircraft cabin fire scenarios while accurately controlling and monitoring fuel and air parameters. Its modular architecture supports both current certification testing and future FAA technical upgrades.
Application
This system is applicable to aviation fuel fire testing of materials and components used in aircraft cabins, with a primary focus on:
Aircraft seat cushions
Seat cushion assemblies
Cushion covers and padding materials
Composite seat components related to fire performance
The FAA-approved NexGen burner provides standardized aviation fuel flame exposure, while the dedicated seat cushion test frame and dynamic motion system allow direct assessment of flame behavior, burning characteristics, and dripping performance under representative test conditions.
Standards
The system is designed to support testing in accordance with the following aerospace fire safety standards:
BSS 7303 – Combustion performance and flame spread behavior of aerospace composite materials
AITM 2.0009 – Determination of flame spread characteristics of aerospace materials
FAR Part 25 Appendix F Part II – Aircraft cabin material combustion, flame spread, and smoke toxicity requirements
Parameters
| Item | Specification |
|---|---|
| Overall dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm |
| System weight | 150 kg |
| Power requirement | 220 V, 10 A |
| Operating temperature | 10°C to 35°C |
| Fuel type | Aviation kerosene |
| Air supply | Minimum 120 PSI compressed air |
| Flame temperature capability | ≥ 2000 ± 50 ℉ |
| Heat flux output | ≥ 10.6 W/cm² |
| Temperature control bath | ≥ 2 × 0.14 m³ |
Features
Uses the FAA-approved NexGen aviation fuel burner, developed to replace discontinued legacy burners (Park DPL 3400. Lennox OB-32. Carlin 200 CRD).
Retains the operating principles of previous burner generations while allowing more precise measurement of fuel and air test parameters.
Modular design supports future FAA upgrades without replacing the entire system.
The burner cone is fabricated from corrosion-resistant and high-temperature alloy for durability in severe thermal conditions.
The NexGen burner includes baffle, fuel nozzle, igniter, fuel rail, mounting plates, ventilation duct, housing, muffler, and acoustic resistance components.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air pressure regulator, and air temperature sensor for stable control.
A temperature-controlled ice bath system (≥ 2 × 0.14 m³) allows regulation of fuel temperature before combustion.
Flame characteristics can be adjusted by changing the fuel nozzle and air pressure to meet different standard requirements.
The burner is covered with a thermal insulation blanket to protect fuel lines and the burner body.
Capable of delivering flame temperature of at least 2000 ± 50 ℉ and heat flux of at least 10.6 W/cm².
Mounted on a powder-coated steel frame with integrated digital scale for accurate positioning and measurement.
Includes a calibrated load cell weighing system.
Features a movable seat cushion test fixture and a movable drip collection tray.
Calibration uses a thermocouple comb composed of seven grounded K-type thermocouples (1.6 mm diameter, ceramic-insulated, metal-sheathed, 30 AWG wire), fixed on an angle bracket for standardized placement on the specimen frame.
Includes a radiant heat flux sensor with cooling system, installed on a fixed support bracket.
在线联系供应商
Other supplier products
 |
Twist Compression Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Twist Compression Tester is a laboratory tribology instrument designed to eval... |
 |
Spinneret Inspection Microscope | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk ① Mechanical Components Overview 1. This machine employs an X-Y-Z three-axis moti... |
 |
Geotextile equivalent aperture tester (wet sieve method) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geotextile equivalent pore size tester (wet sieving method) is an instrument u... |
 |
Leather Seam Fatigue Tester |Seam Fatigue Tester | Textile Testing Products | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing for ... |
 |
Torque - to - Failure Tester for Metal Bone - connecting Screws | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Torque-to-Failure Tester for Metal Bone-Connecting Screws is a specialized device ... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
