Single Cable Vertical Flame Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets).
Application
G233 Fabric vertical combustion tester is mainly used to evaluate the combustion characteristics of plastics and other non-metallic materials in fire. It is suitable for lighting equipment, low-voltage electrical appliances, household appliances, machine tools,electrical tools, electronic instruments, electrical instruments, electrical connectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, but also suitable for insulation materials,engineering plastics or other solid combustible materials industry. In addition, it can also be used by the plastics industry, inspection departments and scientific research institutions.
Standard
GB/T 2408-2008:Plastics - Determination of burning characteristics - Horizontal and vertical test
GB/T 5455:Textiles - Burning behaviour - Determination of damaged length, afterglow time and afterflame time of vertically oriented specimens
GB/T 13488:Rubber - Determination of the burning behaviour of vertical specimens
GB/T 5169.16-2008:Fire hazard testing for electric and electronic products - Part 16: Test flames - 50W horizontal and vertical flame test methods
GB/T 8332-2008:Test method for flammability of cellular plastics - Horizontal burning method
GB/T 5169.17-2008:Fire hazard testing for electric and electronic products - Part 17: Test flames - 500W flame test methods
ASTM D4804:Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ISO 1210:Plastics - Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
ISO 9772:Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
ISO 9773:Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
IEC 60332-1-1~3:2004:Tests on electric and optical fibre cables under fire conditions - Part 1-1~3: Test for vertical flame propagation for a single insulated wire or cable
Parameter
| Description | Details |
|---|---|
| Combustion Angle | 0°-45° |
| Power | 50W, 500W, 1000W |
| Flame Application Time | 0——999.9S |
| Flame Height | 20±1mm, 40±2mm, 50——60mm |
| Temperature Measurement Distance | 10±1mm, 55±1mm, 95mm (assuming the last value should have a unit, here added "mm" for consistency) |
Technical Parameters
1.Stainless steel box, the height of 1300mm, width of 300mm, depth of 450mm.
2.Two stainless steel rods, can bind single wire cable or optical cable sample.
3.1KW mixed standard burner, can provide the standard test fire source.
4.Regulating gas and air flow rate of the rotor flow meters.
5.Pressure gauge and pressure relief valve to ensure that the pressure output is 0.1MPA.
在线联系供应商
Other supplier products
 |
Urinary Catheter Strength Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Urinary Catheter Strength Tester is designed to evaluate the physical strength... |
 |
Density Gradient Column Apparatus丨Density Gradient Column System | Scope of application: Used for the measurement of density and relative density of plastics and other materials, the instrument adopts the Archimed... |
 |
Hot Tack Tester / Heat Seal Tester | Standards GB/T 34445 - 2017 ASTM F2029 Main Uses The hot - tack tensile tester is an instrument specifically designed to test the hot - tacking ... |
 |
walk in Salt Spray Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 TheLarge-Scale Composite Salt Spray Test Chamberis a professional environmental simulation instrument d... |
 |
Full Notch Creep Tester / Full Notch Creep Test FNCT | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
