CE Certified Belt Abrasion Tester Supplier China
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Belt Abrasion Tester is a laboratory testing instrument designed to evaluate the abrasive wear resistance of materials under controlled three-body abrasion conditions. You use a rotating pin pressed against a continuously moving abrasive belt under a constant dead-weight load, while both the pin rotation and belt speed are precisely controlled. An indexing linear slide ensures that the pin continuously contacts fresh abrasive material, providing repeatable and comparable wear results in accordance with ASTM G132.
Standards
ASTM G132 – Standard Test Method for Pin Abrasion Testing
Parameters
| Parameter | Specification |
|---|---|
| Pin Diameter | 2 – 10 mm |
| Pin Rotational Speed | 15 – 50 rpm |
| Maximum Load | 200 N (dead-weight loading) |
| Nominal Contact Pressure | 1 – 2.5 MPa |
| Sliding Speed | 10 – 100 m/s |
| Wear Path Length | 4 – 10 m |
| Belt Width | 100 mm |
| Belt Length | 1.200 – 2.000 mm |
| Standard Abrasive | 150-grit garnet |
| Optional Abrasives | 80 – 220 grit |
| Belt Drive | DC geared motor |
| Pin Drive | DC geared motor |
| Indexing Drive | AC servo motor |
| Test Temperature | Ambient |
| Control System | Touch-screen PLC |
Features
(1) Rotating pin-on-rotating belt configuration realistically simulates abrasive cutting and ploughing mechanisms.
(2) Dead-weight loading provides stable and repeatable normal force without control fluctuations.
(3) Indexing linear slide continuously exposes fresh abrasive surfaces, preventing wear track overlap.
(4) Independent control of pin rotation speed and belt sliding speed improves test flexibility.
(5) Low-cogging servo indexing drive ensures accurate and smooth pin positioning.
(6) PLC-based control system reduces operator influence and improves repeatability.
(7) Parallel wear tracks enable direct comparison between test pins and reference pins.
(8) Fully compliant with ASTM G132 requirements for standardized abrasive wear testing.
Accessories
(1) Pin holding fixture for 2–10 mm diameter pins
(2) Indexing linear slide assembly
(3) Abrasive belts, 150-grit garnet
(4) Optional abrasive belts, 80–220 grit
(5) Reference pin for comparative testing
(6) Test pins in different material types
在线联系供应商
Other supplier products
 |
AATCC 199 Drying Rate Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Drying Time Tester is a precision instrument designed to measure ... |
 |
High-precision Material Thermal Conductivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction It adopts the internationally popular method of heat flow meter to detect t... |
 |
Vacuum Cleaner Filtration Test System，vacuum cleaner particle capture efficiency tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Vacuum Cleaner Filters for emission characterisation of vacuum cleaners (EN 60312) For emi... |
 |
OEM Catheter Flexibility Tester for Medical Industry | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Flexibility Tester utilizes a control system combining a PLC and... |
 |
Sanitary Napkin Absorption Speed meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main uses: The absorption speed tester is used to measure the absorption speed of sanitary... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
