Pin/Ball-on-Disc Tribometer
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Pin-on-Disc Machine is a classic tribological testing instrument designed for studying friction, wear, and contact behavior of materials under controlled sliding conditions. You can use a pin or ball sample loaded vertically against a rotating horizontal disc to simulate real-world sliding contacts. The instrument features a pneumatic loading system that minimizes inertia effects on friction and wear response, making it suitable for dry, lubricated, and extended contact-type testing.
Application
You can apply this machine for:
(1) Evaluating dry friction and wear performance of metals, ceramics, and composite materials.
(2) Studying friction coefficient and wear behavior under lubricated conditions.
(3) Assessing wear resistance of coatings and surface-treated layers.
(4) Comparing tribological performance of lubricants.
(5) Friction and wear research of bearing and engineering materials.
(6) Simulating line or surface contact for piston ring–cylinder liner materials.
(7) Testing sliding bearing and journal materials.
(8) Investigating material wear under reciprocating motion.
(9) Correlating friction state with contact potential.
Standards
You can perform tests according to these procedures:
(1) ASTM G99 – Pin-on-Disc wear testing method.
(2) ASTM F732 – Reciprocating pin-on-plate friction test method.
(3) DIN 50324 – Methods for testing friction and wear.
(4) ISO/DIS 7148-2 – Guidelines for pin-on-disc friction and wear testing.
Parameters
| Parameter | Specification |
|---|---|
| Rotational Speed | 20 – 2,000 rpm |
| Equivalent Sliding Velocity | 0.05 – 8 m/s |
| Test Track Radius | 0 – 35 mm |
| Load Method | Pneumatic / Weight loading |
| Pneumatic Load Range | 25 – 1,000 N |
| Weight Load Range | 5 – 100 N |
| Cyclic Load Amplitude | Up to 50% of set load |
| Cyclic Load Form | Sine / Triangle |
| Cyclic Load Frequency | Max 1 Hz |
| Friction Force Measurement | 0 – 50 N / 0 – 1,000 N |
| Wear Measurement | LVDT displacement sensor |
| Wear Measurement Range | 0 – 2.5 mm |
| Wear Resolution | <1 µm |
| Contact Potential | 40 mV DC |
| Temperature Measurement | K-type thermocouple |
| Disc Sample | Ø75 mm × 8 mm |
| Pin Sample | Ø8 mm × 35–68 mm |
| Ball Sample | Ø6 mm |
| Drive Motor | 2.2 kW AC vector motor |
| Control & Data Acquisition | Software + USB interface |
在线联系供应商
Other supplier products
 |
Automated Clutch Friction Test Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automated Clutch Friction Test Machine is a laboratory test system designed to... |
 |
MARK-II Slip Resistance Tester ASTM F1677 | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
Filter Media Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Test System for multiple parameter testing at filter media, space-saving design by... |
 |
Helmet Webbing Micro - displacement Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet webbing micro-displacement wear testing machine is a comprehensive test... |
 |
Silicon-based negative expansion in situ fast screening system | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Silicon-based Negative Electrode Expansion In-situ Fast Screening System is de... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
