Multi-Station Hip Joint Simulator
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Multi-Station Hip Joint Simulator is a specialized tribological testing device designed to simulate friction and wear behavior of artificial hip joints under physiological gait conditions. Driven by motors and servo-pneumatic loading systems, it reproduces anatomically realistic motions of the femoral head against the acetabular cup with dynamic bi-axial loading. The simulator supports multiple stations running in parallel, providing a cost-effective solution for long-term wear testing, research, and quality evaluation of hip implants.
Application
You can use this simulator for:
In vitro wear simulation of total or partial hip joints.
Evaluating wear performance of femoral head and acetabular cup material pairings.
Studying metal–polymer, ceramic–ceramic, and ceramic–polymer bearing combinations.
Investigating long-term wear and failure mechanisms of artificial joints.
Comparative testing during medical device R&D.
Type testing and consistency verification of hip joint products.
Biotribology research at universities and research institutes.
Regulatory testing, product registration, and quality control of artificial hip joints.
Standards
ASTM F732 – Reciprocating Pin-on-Plate Wear Test (applied to joint simulators).
Parameters
| Parameter | Specification |
|---|---|
| Test Configuration | Acetabular Cup / Femoral Head |
| Number of Stations | 6 or 12 |
| Test Frequency | 1.06 Hz (50 Hz power) / 1.27 Hz (60 Hz power) |
| Maximum Load | 3 kN (6 stations) / 2 kN (12 stations) |
| Minimum Load | 0.4 kN |
| Average Load | 1.2 kN |
| Load Form | Double-peak dynamic load |
| Flexion-Extension (FE) | 46° |
| Abduction-Adduction (AA) | 12° |
| Force Trajectory Shape | Elliptical |
| Force Trajectory Ratio | 3.8 |
| Trajectory Length | 1.73 × r (r = femoral head radius) |
| Drive | Motor + Mechanical Crank |
| Motor Power | 370 W |
| Lubricant Volume | 500 ml |
| Controlled Parameters | Load, cycle number |
在线联系供应商
Other supplier products
 |
Button Impact Machine | Get a quote: Whats/App: +86 181 0160 0864 With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a... |
 |
Elmendorf Tearing Strength Testers | Get a quote: Whats/App: +86 181 0160 0864 G008 Manual Tearing Tester, The Elmendorf tear method can be used to test the force required to extend ... |
 |
Building Material Flammability Test Furnace | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The touch screen-controlled building materials flammability test furnace, upgraded... |
 |
Spinal Internal Fixation System Assembly Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinal Internal Fixation System Assembly Testing Machine is a specialized devi... |
 |
Abrasion testing machine / Abrasion Testers | Product Introduction Wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles, tires,... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
