Twist Compression Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Twist Compression Tester is a laboratory tribology instrument designed to evaluate friction behavior and adhesive wear properties of materials under combined axial compressive load and relative torsional motion. You use this system to perform standardized tests under dry or lubricated conditions in accordance with ASTM G223, enabling reliable comparison of material friction coefficients, friction torque, and adhesive wear performance.
Application
You can use the Twist Compression Tester for the following applications and test materials:
(1) Friction and adhesive wear evaluation of metallic materials such as carbon steels, stainless steels, non-ferrous alloys, and structural alloys.
(2) Performance assessment of surface-engineered materials including hardened layers, coated surfaces, and treated contact pairs.
(3) Tribological testing of bearing materials, sealing materials, and mechanical contact components.
(4) Comparative studies of dry versus lubricated friction behavior.
(5) Adhesive wear mechanism investigation under high contact pressure.
(6) Material screening during component design and development.
(7) Research and teaching in tribology laboratories and academic institutions.
(8) Quality evaluation and consistency verification in industrial testing laboratories.
Standards
ASTM G223 – Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test
Parameters
| Parameter | Specification |
|---|---|
| Hollow Cylinder Specimen | 25 mm outer diameter, 3 mm wall thickness |
| Flat Specimen | 40 × 40 mm, 3 mm thickness (variable) |
| Load Range | 1.5 – 50 kN |
| Loading Method | Hydraulic |
| Load Measurement | Load cell |
| Load Control | Manual |
| Friction Measurement | Force transducer |
| Test Temperature | Ambient |
| Lubrication | Manual |
| Rotational Speed | 0 – 37.4 rpm |
| Motor Type | Three-phase AC gear motor |
| Motor Power | 2.6 kW |
| Maximum Output Torque | 630 Nm |
| Control and Data Acquisition | Touch-screen PLC |
| Data Export | USB storage |
在线联系供应商
Other supplier products
 |
Cut Susceptibility Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Cut Susceptibility Tester is designed to evaluate the resistance of photovolta... |
 |
Vertical low temperature cold resistance testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue te... |
 |
Safety Helmet Electrical Insulation Tester GB/T2811 | Product Introduction: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high d... |
 |
Automotive Wire Marking Durability Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Marking Durability Tester is designed to evaluate the durability and adhesion of pr... |
 |
Geosynthetic Transmissivity Tester丨Geotextile Test Machine | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
