Gas Jet Erosion Rig/Jet Erosion Test Rig
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Gas Jet Erosion Rig is a laboratory testing system designed to evaluate erosion wear behavior of materials and coatings subjected to high-velocity particle-laden gas flow. You use this equipment to simulate solid particle impact erosion under controlled conditions by adjusting particle velocity, mass flow rate, impingement angle, and specimen orientation. It is suitable for standardized testing and comparative analysis of metals, ceramics, polymers, and coated surfaces.
Application
You can apply the Gas Jet Erosion Rig in the following scenarios and material evaluations:
(1) Erosion resistance testing of metallic materials, ceramics, polymers, and composite materials.
(2) Performance evaluation of hard and soft coatings, including wear-resistant and protective coatings.
(3) Aerospace component erosion testing, such as turbine blades and structural parts.
(4) Wind energy component evaluation, including erosion of wind turbine blades.
(5) Industrial equipment and pipeline erosion assessment under particle-laden gas flow.
(6) Automotive coating durability and surface protection studies.
(7) Academic research and teaching in material erosion and wear mechanisms.
(8) Quality control, process optimization, and service life assessment of coated components.
Standards
You can conduct erosion tests in accordance with the following international standards:
(1) ASTM G76 – Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
(2) DIN 50332 – Erosion Testing by Particle Jet Method
(3) ISO 20567-1 – Paints and Varnishes – Determination of Stone-Chip Resistance – Part 1
(4) ISO 20567-2 – Paints and Varnishes – Determination of Stone-Chip Resistance – Part 2
Parameters
| Parameter | Specification |
|---|---|
| Particle Nozzle | Inner diameter 4.7 mm, length 300 mm, stainless steel |
| Nozzle Height Adjustment | Adjustable nozzle-to-specimen distance |
| Specimen Holder | Tiltable, specimen size 50 × 50 mm |
| Particle Velocity (Standard Mode) | 25 – 80 m/s at 1.5 bar |
| Particle Velocity (Enhanced Mode) | Up to 120 m/s at 4 bar |
| Particle Mass Flow Rate | 0.2 – 2 g/min |
| Gas Heating | Optional, up to 100°C |
| Power Supply | 220/240 V, single phase, 50 Hz, 1.5 kW |
| Compressed Air (Standard Mode) | 1.5 bar, 3.5 cfm |
| Compressed Air (Enhanced Mode) | 4 bar |
| Installation Dimensions | 1000 × 1200 × 400 mm |
| Installation Type | Floor-standing |
在线联系供应商
Other supplier products
 |
Floor Caster Wear Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Floor Caster Wear Tester is designed to evaluate the wear resistance of chair ... |
 |
Medical injection needle rigidity tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Medical Injection Needle Rigidity Tester is designed to evaluate the mechanica... |
 |
SUGA U48AU Carbon Arc Weathering Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 The SUGA U48AU Carbon Arc Weathering Test Chamber is a globally recognized instrument designed for high... |
 |
Multilayer geotextile single-layer thickness tester丨IS0 9863 | Meet the standard GB/T17598-1998. GB/T 13761.1-2022. JTG E50-2006. IS09863-90 Scope of application The multi-layer sample is mechanically separa... |
 |
Spinal Internal Fixation System Component Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinal Internal Fixation System Component Testing Machine is a specialized mec... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
