Plastic biodegradation testing system for ISO compostability testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Plastic Biodegradation Testing System complies with and supports testing according to the following standards:
(1) GB/T 19277.1-2011 Determination of the ultimate aerobic biodegradability of materials under controlled composting conditions – Method by analysis of released carbon dioxide – Part 1: General method
(2) GB/T 19277.2-2013 Determination of the ultimate aerobic biodegradability of materials under controlled composting conditions – Method by analysis of released carbon dioxide – Part 2: Gravimetric determination of carbon dioxide released under laboratory conditions
(3) GB/T 19811-2005 Determination of the degree of disintegration of plastic materials under defined composting conditions
(4) ISO 16929:2021 Plastics – Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
(5) GB/T 29649-2013 Determination of bio-based content in bio-based materials – Liquid scintillation counting method
(6) GB/T 33797-2017 Determination of the ultimate anaerobic biodegradability of plastics under high-solids composting conditions by analysis of released biogas
(7) GB/T 22047-2008 Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring oxygen demand or released carbon dioxide
(8) GB/T 20197-2006 Degradable plastics – Definition, classification, marking and degradability requirements
(9) GB/T 32163.2-2015 Ecodesign product assessment specification – Part 2: Degradable plastics
(10) GB/T 16716.7-2012 Packaging and packaging waste – Part 7: Biodegradation and composting
(11) GB/T 38082-2019 Biodegradable plastic shopping bags
(12) GB/T 29646-2013 Modified polyester biodegradable plastics for blow molding films
(13) GB/T 32366-2015 Biodegradable poly(butylene adipate-co-terephthalate) (PBAT)
(14) GB/T 33798-2017 Biodegradable polyester roll bags
(15) GB/T 35795-2017 Fully biodegradable agricultural mulch films
Parameters
| Item | Description |
|---|---|
| Test Method | Aerobic composting biodegradation |
| Composting Mode | Static composting vessel |
| Measured Indicator | Carbon dioxide (CO₂) release |
| Evaluation Results | Biodegradation percentage, disintegration degree |
| Test Environment | Controlled temperature, oxygen concentration, and humidity |
| Carbon Source Analysis | Total Organic Carbon (TOC) |
| Monitoring Method | Continuous monitoring and periodic measurement |
| Blank Control | Blank composting vessel included |
Features
You can determine the ultimate aerobic biodegradation capability of plastic materials through precise CO₂ monitoring.
The system simulates controlled composting conditions with regulated temperature, oxygen, and humidity.
Biodegradation percentage is calculated by comparing actual CO₂ release with theoretical CO₂ based on TOC.
The system allows evaluation of both biodegradation performance and material disintegration at the end of the test.
It supports reliable comparison between test samples and blank controls.
Accessories
(1) Static composting vessels
(2) Carbon dioxide collection and measurement units
(3) Temperature and humidity control components
(4) Oxygen concentration control components
(5) Sample mixing and inoculation tools
在线联系供应商
Other supplier products
 |
Thermoplastic Ball Indentation Hardness Testing Machine ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) JTG E50 T1143-2006 — Technical specification for drainag... |
 |
Industrial Oil Filter Performance Test Bench | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed to meet the following standards: JB/T 5088.2—2008 ... |
 |
Surface Performance Tester STD-FB4 - A | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed b... |
 |
High precision continuous load surface tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces GB/T 17657-202... |
 |
Scratch resistance test equipment with stable pressure | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed to comply with major international and national stand... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
