Safety helmet impact and penetration tester for EN 397 compliance testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The Safety Helmet Acceleration Impact and Penetration Tester is used to evaluate the impact resistance performance of safety helmets and to assess their protective capabilities.
Impact Test Technical Specifications
| Parameter | Specification |
|---|---|
| Base | Made of reinforced concrete with a mass not less than 500 kg |
| Numerical analysis system | Composed of a force sensor, single-axis acceleration sensor, data processing, display, and recording units; capable of force measurement impact tests |
| Overall machine height | Approximately 4.2 meters |
| Impact hammer | Weight 5.0 ± 0.1 kg, hemispherical impact surface, radius 50 ± 1 mm, material stainless steel |
| Impact height | 1000 ± 5 mm |
| Force sensor (specification) | Measurement range 0–20000 N, minimum frequency response 5 kHz |
| Force sensor inclusion | Force sensor included |
| Impact anvil | Flat anvil (diameter 130 ± 3 mm, thickness ≥ 15 mm), hemispherical anvil radius 48 ± 1 mm, hardness not less than HRC50 |
Penetration Test Technical Specifications
| Parameter | Specification |
|---|---|
| Penetration hammer weight | 3.0 ± 0.05 kg |
| Hammer tip angle | 60 ± 0.5° |
| Penetration cone length | 40 mm |
| Penetration cone diameter | 28 mm |
| Cone tip radius | 0.5 mm |
| Hardness | HRC 45–50 |
| Penetration height | 1000 ± 5 mm |
Main Machine Features
Uses a servo motor, servo controller, and matching control unit as the drive component; long motor lifespan.
Hollow gear reduction system with low power consumption, low noise, high efficiency, and high reliability.
Zhongtai data acquisition card ensures long-term testing accuracy.
Direct-insert transmission device provides high positioning accuracy, long lifespan, low friction, capable of high-speed operation and reversible rotation; greatly improves machine displacement and speed accuracy.
Position limit function enhances safety and convenience for tests requiring restricted travel.
Wide measurement range suitable for multiple international standards.
Integrated design: Regardless of machine configuration, computer parameters can be modified and permanently saved without circuit adjustments.
High-precision return positioning ensures accurate return to the start position regardless of return speed, improving testing efficiency.
Common parameter memory function (e.g., test speed), allowing the machine to start with preset parameters.
Flexible operation: Supports continuous and jog modes for user convenience in different situations.
Multiple safety protections: Adjustable upper and lower limit protection, emergency stop, etc.
在线联系供应商
Other supplier products
 |
Adiabatic Accelerated Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com An Accelerating Rate Calorimeter (ARC) is a high-precision thermal analysis instrument that... |
 |
Alternative to Mechanical load testing machine for photovoltaic modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mechanical Load Testing Machine for Photovoltaic Modules is designed to verify the stru... |
 |
Full Notch Creep Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com This testing machine is used to test the environmental stress cracking performance of plast... |
 |
3D Printed Fiber Oil Separation Analyzer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fiber Oil Extractor, also known as the Rapid Grease Extraction Apparatus,... |
 |
Spring Torsion Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spring Torsion Testing Machine is a specialized device used to evaluate the torsional p... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
