Medical Dental Implant Mechanical Fatigue Testing Equipment ISO 14801 Series
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
This device complies with standards specifying the fatigue testing methods for transmucosal single-piece endosseous dental implants and their prefabricated prosthetic components. It is designed to compare the fatigue strength of dental implants of different designs and sizes. The fixture features an adjustable-angle design to accommodate specimens both with and without prefabricated angulation, and it supports standard water bath environmental testing. The test protocol is 2 Hz for 2 million cycles.
The M-series electromagnetic equipment provides precise sinusoidal load control with stable peak values. It can be equipped with comprehensive testing fixtures (adjustable prefabricated angles, water bath environment, etc.) to meet standard test requirements and deliver accurate, effective test procedures (SOPs), facilitating mechanical performance analysis or comparative studies of dental implants with different designs.
Product Features
New-generation fatigue testing system driven by a large electromagnetic motor.
Direct-drive electromagnetic motor ensures stable operation, high repeatability, and precise control of force and displacement.
Built-in electromagnetic actuator features low friction and high repeatability, with fast system response and high speed.
Capable of performing tension, compression, bending, shear, creep, and relaxation tests.
Meets strict requirements for modern material mechanics testing, including high precision, high frequency, high stability, and durability.
Features oil-free, seal-free, maintenance-free design, long service life, high integration, easy installation, and compact footprint.
Supports a variety of clamps and accessories.
Specifications
| Parameter | Specification |
|---|---|
| Maximum Load Peak | 4400 N |
| Dynamic Load Peak | 3000 N |
| Static Load Peak | 2100 N |
| Machine Class | 0.5 |
| Load Measurement Range | 0.4%–100% F.S. |
| Load Measurement Accuracy | ±0.2% of indicated value (within measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Travel | 30 mm |
| Displacement Resolution | 0.1 μm |
| Test Space (between upper and lower fixtures) | 0–950 mm |
| Net Weight | ~900 kg |
| Dimensions | ~1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath, high temperature, low temperature, humidity environment, etc. |
| Applicable Scenarios | Fatigue, fracture, and static testing of metals, polymers, and composite materials; Static and dynamic testing of surgical implants (including trauma, joint, spine, and dental applications); Tensile fatigue testing of polymer materials; Crack propagation testing of rubber materials |
| Optional Fixtures | Mechanical tensile, compression, and bending clamps; Specialized clamps for femoral stems, four-point bending, spinal rods/screws, tibial plateau, vertebral resection models for compression/tension, dental implants, etc. |
Accessories
(1)Load applicators and fixtures for different implant sizes.
(2)Servo-hydraulic or electromechanical actuators.
(3)Artificial bone blocks or mounting jigs for implant placement.
(4)Sensors for force, displacement, and cycle counting.
在线联系供应商
Other supplier products
 |
Drainage sheet horizontal permeability tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Plastic Drainage Board Horizontal Water Flow Tester is used to determine the characteri... |
 |
Advanced Vacuum Cleaner Filter Particle Removal Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard The Vacuum Cleaner Filters is designed for tests on vacuum cleaners (vac) for hou... |
 |
Tracking indices of solid insulating materials Test Machine ,IEC60112 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This tester is in accordance with IEC60112 standard . It is suitable for li... |
 |
Voltage Drop Tester for Automotive Wire Connectors | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Voltage Drop Tester for Automotive Wire Connectors is designed to measure the voltage d... |
 |
Buy prefilled syringe force tester machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 0962 - 2021 : Determination of Push-force for Prefilled Syringes, etc. Fea... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
