Safety Helmet Roll-off Testing Equipment
The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the pulling forces and impact scenarios of an accident, it accurately assesses the reliability of the helmet's retention system, providing a rigorous technical safeguard for the safety of cyclists. The equipment mainly consists of a simulated head form, a tensile loading system, an impact track, and a data acquisition system. During the test, the helmet is secured to the simulated head form according to standard wearing procedures, and the length of the helmet straps and the tightness of the buckles are adjusted to ensure a fit that matches actual wearing conditions.
Application
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Standard
(1)IS 4151:Indian Standard for Protective Helmets
(2)ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds
Feature
(1)Dynamic Tensile Testing: A tensile force is applied to the helmet using a tensile loading system, and the maximum tensile force is recorded to ensure the helmet does not detach during the test.
(2)Impact Testing: The helmet is worn and slid down a track to impact a rigid obstacle at a specific speed, and whether the helmet detaches is recorded.
(3)Data Acquisition: An accelerometer records the impact force on the headform, comprehensively evaluating the stability of the fastening system under dynamic impact.
(4)Safety Protection: The equipment is equipped with a safety enclosure to prevent injury from flying helmet fragments during testing.
Parameters
| Item | Detail |
|---|---|
| Mass of initial load | 3 kg ± 0.1 kg |
| Mass of falling weight | 10 kg ± 0.01 kg |
| Lowering height | 0.5 meters ± 0.01 meters |
| Measuring method | manual |
| Electricity | 220V 50HZ |
| Test theory | vertical descent |
在线联系供应商
Other supplier products
 |
IEC 63180 Infrared and Microwave Sensing Test Dummy | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The IEC 63180 Infrared and Microwave Sensing Performance Test Dummy is a comprehen... |
 |
Aluminum Tube Internal Coating Continuity Tester | The continuity tester for the inner coating of aluminum tubes is an important device specifically used to detect the continuity of the inner coatin... |
 |
Leather Vamp Flexing Extensibility Testing Machine / ISO 5423 / SATRA TM25 | Introduction: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be... |
 |
Computer controlled electronic universal testing machine | Product Introduction 1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 fo... |
 |
Medical Masks Bacterial Filtration Efficiency (BFE) Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Medical Masks bacterial filtration efficiency tester also called BFE test machine ... |
