Arc Resistance Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Arc Resistance Tester is a special instrument necessary for simulated safety test items specified in GB1411. IEC61621. ASTMC495. UL746A and other standards.Arc resistance test system is a high-precision equipment specially developed for the test surface of electrical insulation materials, suitable for electrical insulation materials, plastics, films, resins, mica, ceramics, glass, insulating paints and other insulating materials arc resistance performance assessment, can also be applied to product testing and new materials electrical performance research purposes.
Comply with the standard
GB/T1411-2002 dry solid insulating material resistance to high voltage, small current arc discharge test (equivalent to IEC and ASTM D495 and other standards; in line with UL 746A and other test methods
Functional principle
Insulating materials to resist deterioration caused by high-voltage arc action, usually with a standard arc flame on the surface of the material caused by charring to the surface conductivity and the arc disappeared the time required to express the unit of seconds in the plate specimen plus two separated by a certain distance from the tungsten electrodes, depending on the need for high-frequency high-voltage current between the two poles to produce an arc, initially intermittent time is gradually shortened, and finally for the continuous arc and gradually increase the current, the material The material is subjected to gradually harsh arc conditions and eventually cause damage. Arc resistance for high-voltage switch or low-voltage high-current switch insulating materials have important significance, because in the switch opening and closing will often be subjected to arc action, only good arc resistance materials can be selected.
In electrical and electronic equipment within the insulating material when it is exposed to high voltage, small current arc discharge, between them to withstand the initial difference in the immediate surface damage occurs, arc discharge caused by local thermal and chemical decomposition and corrosion and ultimately in the insulating material on the formation of conductive channels, when the formation of conductive channels within the material under test, it can be determined that the material has failed.
Equipment parameters
1. Arc through the time error: 1/8s through 7/8s break ± 5ms, the rest of the program is better than ± 1ms
2. Regulator capacity: 1kVA
3. Rated test voltage: 12.5kV
4.Maximum test voltage: 15.0kV
5. Test voltage accuracy: <1.0%
6. Accuracy of current measurement: <1.0%
7. Electrode pressure on specimen: (0.5±0.05)N
8. Electrode material: tungsten rod
9. Electrode distance: (6.35±0.1)mm
10.Ambient temperature: (23±2)℃.
11.Ambient Humidity: (50±5)%
12. Power supply: 220V±5% 50Hz 10A
Accessories
(1)Optional components that support tester operation.
(2)Examples: electrodes, sample holders, calibration tools, protective shields, and software modules.
(3)Enhance measurement accuracy, safety, and adaptability for different materials.
在线联系供应商
Other supplier products
 |
Solar Radiation Meters / Solar Radiation Sensors | Product Introduction: The purpose of this instrument is to measure the temperature change of the sample with radiant heat. Arrange the sample and... |
 |
Stapler Blade Sharpness Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk It features a 7-inch K600+ core/dot-matrix 65-color 800*480 resolution touchscreen... |
 |
Multi-Functional Scratch Tester | Introduction Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, ... |
 |
Safety Helmet Flammability Tester / Flammability test equipment | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ea... |
 |
Aerospace Wire and Cable Smoke Test Apparatus | Get a quote： Whats/App: +86 181 0160 0864 The Aerospace Wire and Cable Smoke Test Apparatus is designed to assess whether aerospace-grade wires a... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
