Automatic Thermal Deformation Vicat Softening Point Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. It adopts single-chip control, PID phase-modulated output, with upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature..
Applications
plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates.
Standard
(1)GB/T1633《Determination of vika softening temperature (VST) of thermoplastic》
(2)GB/T1634《Determination of plastic load deformation temperature – part 1: general test method》
(3)GB/T8802《Determination of softening temperature of plastic pipe fittings》
(4)IS075-2013《Measurement of plastic load deformation temperature》
(5)ASTM D 648《Test method for temperature of plastic thermal deformation》
(6)ASTM D 1525《Plastic Vicat softening test method》
parameters
| Temperature control range | ambient temperature~300ºC |
| Heating rate | (120±10)ºC/h (12±1)ºC/6min,(50±5)ºC/h (5±0.5)ºC/6min |
| Temperature indication error | 0.1ºC |
| Temperature control accuracy | ±0.5ºC |
| Maximum deformation indication error | ±0.001mm |
| Deformation measurement range | 0-10mm |
| Number of sample racks | 3 |
| The weight of the load bar and the tray | 76g |
| Test span range | 64 or 100mm according to the standard |
| Fuel tank volume | about 13L |
| Heating medium | methyl silicone oil |
| Cooling method | built-in active air cooling or external water cooling |
| Heating power | 2kw |
| Appearance size | length 65cm*width 46cm*height 84cm |
Features
Intelligent PID adjustment, accurate heating rate, precise temperature control, and no difference.
The softening point test machine can do thermal deformation tests of various standard splines.
It can do the Vicat softening point tests of various standard splines.
Simultaneous thermal deformation and Vicat softening point test.
The required load can be automatically calculated according to the test standard and spline size.
Choose two heating rates, switch freely, and make them easy to operate.
Support multi-stripe test. Color separation processing of the test curve intuitively sees the test process of each group of samples.
The test is completed, or the upper-temperature limit is exceeded. And the temperature control is automatically turned off and shut down.
Double protection of software over-temperature protection and external mechanical over-temperature protection so that the test has no worries.
Diversified report settings, perfect report printing function.
在线联系供应商
Other supplier products
 |
High-Speed Reciprocating Friction and Wear Tester (Type 02) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The High-Speed Reciprocating Friction and Wear Tester (Type 02) is designed to eva... |
 |
Blanket Flammability Test Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Bed Blanket Flammability Tester assesses flame retardancy and surface flame sp... |
 |
Aluminum Tube Internal Coating Continuity Tester | The continuity tester for the inner coating of aluminum tubes is an important device specifically used to detect the continuity of the inner coatin... |
 |
Catheter Vacuum Leak Tester | Standards GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods GB 8368 Disposable Infusion SetsYY ... |
 |
Schopper Abrasion Tester | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
