Intramedullary Nails Four - point Bending Fatigue Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Intramedullary Nails Four-Point Bending Fatigue Tester is a specialized testing device designed to evaluate the fatigue performance and mechanical durability of intramedullary nails under cyclic bending loads. It applies repeated four-point bending forces to simulate long-term in vivo stresses, allowing assessment of nail strength, flexibility, and resistance to fracture over time. This tester is widely used in orthopedic research, product development, and quality control to ensure intramedullary nails meet required mechanical reliability standards.
Standard
(1)YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load application, cycle counting, and failure criteria.
(2)ASTM F1264: International standard covering fatigue testing of intramedullary fixation devices, with protocols for sinusoidal loading at 5Hz–20Hz frequencies.
Product Advantages
(1)Precision Fatigue Testing:
Electromagnetic servo-controlled loading system ensures sinusoidal force application with ±0.5% accuracy, adhering to ASTM F1264’s frequency and load requirements.
Adjustable R-ratio (0.1–0.9) and load range (100 N–10.000 N) for versatile testing scenarios.
(2)Customized Fixturing:
Modular four-point bending clamps with interchangeable roller diameters (8–16mm) and contour-matching designs to accommodate diverse nail diameters and lengths.
Anti-slip mechanisms and specimen alignment guides for consistent results.
(3)Advanced Data Acquisition:
Real-time monitoring of cycles, load, and displacement with 5000Hz sampling rate.
Automatic calculation of key parameters: fatigue life (N cycles to failure), fatigue strength (S-N curve generation), and crack initiation points.
(4)User-Centric Design:
Intuitive software with preloaded SOPs for YY/T 0591 and ASTM F1264 compliance.
Multi-language interface (English/Chinese/Spanish) and exportable reports (PDF/Excel/CSV).
(5)Durability & Safety:
Corrosion-resistant steel frame and overload protection system for long-term reliability.
Low-noise operation (<65 dB) suitable for laboratory environments.
Product Features
(1)Load Capacity: 100 N–10.000 N (axial) / 50–500 Nm (torsional).
(2)Frequency Range: 0.01–20 Hz (adjustable for static/dynamic tests).
(3)Temperature Control: Optional environmental chamber (-20°C to +150°C) for simulating physiological conditions.
(4)Software Suite:
Customizable test profiles with automated pass/fail criteria.
21 CFR Part 11 compliance for audit trails and electronic signatures.
(5)Calibration: NIST-traceable certification included, with annual recalibration available.
Technical Parameters
| Parameter | Specification |
|---|---|
| Force Resolution | 0.1 N (axial) / 0.01 Nm (torsional) |
| Angular Accuracy | ±0.1° |
| Crosshead Speed | 0.001–500 mm/min |
| Power Supply | 220V/110V, 50/60Hz |
| Dimensions (W×D×H) | 800×600×1.800 mm |
| Weight | 400 kg |
| Compliance | CE, ISO 13485. YY/T 0591. ASTM F1264 |
在线联系供应商
Other supplier products
 |
Cork Puncture and Chip Detection Instrument | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The rubber stopper puncture debris detector is a device specifically used to detec... |
 |
Needle Flame Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The needle flame test uses a needle-shaped burner of a specified size (0.9 mm), su... |
 |
Footwear Cold Insulation Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Footwear Cold Insulation Tester is designed to evaluate the low-temperature pe... |
 |
Fully Automatic AC/DC High - Voltage Tester for Wires and Cables | Get a quote： Whats/App: +86 181 0160 0864 The fully automatic AC/DC high-voltage tester is specially designed to test the insulation performance ... |
 |
Rubber hose wear testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Rubber Hose Wear Testing Machine is designed to evaluate the abrasion resistan... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
