Bone Plate Four-Point Bending Fatigue Testing Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Bone Plate Four-Point Bending Fatigue Testing Machine is a specialized device used to evaluate the fatigue performance and mechanical strength of orthopedic bone plates. It applies cyclic four-point bending loads to simulate physiological conditions, allowing assessment of the plate’s durability, bending strength, and failure characteristics under repeated stress.
Standards
(1)YY/T 1503
(2)ASTM F382
These standards specify the testing methods for the bending fatigue performance of metallic bone plates. They provide evaluation methods for different designs of bone plates. Fatigue tests are conducted under cyclic loading at a frequency of 5 Hz, with R = 0.1. for 1 million cycles or until specimen failure.
The M series electromagnetic testing system provides precise sinusoidal load control and offers comprehensive test fixtures (different sizes, contoured rollers, etc.) to accommodate specimens of various dimensions. The system also provides accurate and effective testing procedures (SOPs) to support mechanical performance analysis of metal bone plates or comparison of different bone plate designs.
Application
The Bone Plate Four-Point Bending Fatigue Testing Machine is designed to evaluate the mechanical durability and structural performance of orthopedic bone plates under repeated bending loads. Typical applications include:
Orthopedic implant testing: Assess bending strength, stiffness, and fatigue life of bone plates.
Quality control: Ensure consistent mechanical performance of bone plates during production.
Research and development: Optimize design, material, and geometry of bone plates for enhanced fatigue resistance.
Standards compliance: Perform tests according to ISO 9585. ASTM F382. and other relevant international guidelines.
This machine helps verify that bone plates can withstand cyclic bending stresses encountered in clinical use.
Product Features
Next-generation fatigue testing system driven by a large electromagnetic motor.
Direct-drive electromagnetic motor ensures stable operation, high repeatability, and precise control of force and displacement.
Built-in electromagnetic actuator with low friction and high repeatability; high system responsiveness and speed.
Capable of performing tensile, compressive, bending, shear, creep, and relaxation tests.
Meets modern material testing requirements for high precision, high frequency, stability, durability, and reliability.
Oil-free, seal-free, maintenance-free, long life, highly integrated, easy installation, and compact footprint.
Wide selection of clamps and accessories available.
Specifications
| Parameter | Value |
|---|---|
| Maximum Load Peak | 1100 N |
| Dynamic Load Peak | 1000 N |
| Static Load Peak | 700 N |
| Testing Machine Grade | 0.5 |
| Load Measurement Range | 0.4% – 100% F.S. |
| Load Measurement Accuracy | ±0.2% of indicated value (within measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 μm |
| Test Space (Upper-Lower Fixture Gap) | 0–950 mm |
| Net Weight | Approx. 900 kg |
| Dimensions | Approx. 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath, high temperature, low temperature, humidity environment, etc. |
| Applications | Fatigue/fracture/static testing of metals, polymers, composites; static/dynamic testing of surgical implants (trauma, joint, spine, dental), polymer tensile fatigue testing, rubber crack propagation testing, etc. |
| Optional Fixtures | Mechanical tensile clamps, compression clamps, bending clamps, femoral stem fixtures, four-point bending fixtures, spinal rod/screw fixtures, tibial plateau fixtures, vertebral resection model compression/tensile fixtures, dental implant fixtures, etc. |
在线联系供应商
Other supplier products
 |
Drying Rate Tester Air Flow Method | Get a quote: Whats/App: +86 181 0160 0864 The Airflow Method Fabric Drying Rate Tester is an automated precision instrument engineered to quantif... |
 |
Safety Helmet Impact and Penetration Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Acceleration Impact and Penetration Tester is a specialized test... |
 |
Spectrophotometer ISO 7724 | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
 |
Textile Fiber Composition Analyzer | Get a quote： Whats/App: +86 181 0160 0864 The Textile Fiber Composition Analyzer is an intelligent laboratory testing system designed for the qua... |
 |
Standard Helmet Visual Field Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Standard Helmet Visual Field Tester is a precision instrument designed to eval... |
Same products
 |
Laser Cutting Machines | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | 卖方: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
