Fixed Bed Process Hydrogen Peroxide Plant
Fixed Bed Process Hydrogen PeroxidePlant
Product Description
There are several methods for hydrogen peroxide production and manufacturing, among them the AO(auto-oxidation) process is the most prevailing one. In this process, 2-alkyl anthraquinone is mixed with organic solvent to make up the working solution, which is hydrogenated in presence of catalyst, and the resulting is oxidized by air (or oxygen) in counter-current way before being extracted, regenrated, purified and enriched to get commercial hydrogen peroxideproduct. Depending upon the different reactor type in the hydrogenation unit, AO process is further divided into Fixed Bed Reactor Process and Fluidized Bed Reactor Process.
Features of Fixed Bed Process Hydrogen Peroxide
Compared to the other Fixed Bed Ractor Process prevailing in China, the fixed bed process Hydrogen Peroxide technology offered by SL TEC has following advantages as below.
● Advanced DCS control system, SIS safety system and industrial video monitoring system are set up. The optimal control, alarm and safety interlocking of various process parameters in the hydrogen peroxide production process are realized. Implement video surveillance for key point control points and key positions. Ultimately, the entire system is stable, high-yield, low-cost and safe.
● Concentration adopts the world's most advanced falling film distillation technology to make the residence time of hydrogen peroxide solution in the falling film evaporator short to avoid the decomposition of hydrogen peroxide; in addition, the evaporator uses low pressure saturated steam to make the effective temperature difference ≦8~10 °C, which saves steam consumption while reducing unit consumption.
● The Fenton oxidation method + biochemical treatment sewage technology has been successfully applied, so that the sewage of the hydrogen peroxide device is completely discharged after being treated.
在线联系供应商
Other supplier products
 |
Urea Formaldehyde (UF) Glue Plant | Urea Formaldehyde (UF) Glue Plant Agent Technology and Plants Technology Introduction The Urea Formaldehyde (UF) technology provided by SL... |
 |
ECH production process by glycerin method | Epichlorohydrin is the main raw material for the production of epoxy resin. It is also an important organic chemical raw material and fine chemica... |
 |
PPC Plant | PPC (polypropylene carbonate)is acompletely biodegradable environment-friendly plastic synthesized from carbon dioxide and propylene oxide. Besides... |
 |
Anhydrous formaldehyde plant | SL TEC has close to ten years experience in based on silver contact process(or silver catalyzed process). A lower methanol consumption, higher for... |
 |
Acrylic Impact Resistant Modifier | is mainly used to improve the impact properties and processability of PVC. PVC is important among general plastics. It has high strength, low pri... |
Same products
 |
拓纷生物制药冻干机 TF-LYO-50 | 卖方: 上海拓纷机械设备有限公司 | LYO生物制药冷冻干燥机采用标准化制造工艺生产，降低制造成本，缩短生产周期，同时确保性能和可靠性。冷冻干燥机的设计优先考虑安全性、多功能性、可靠性和长使用寿命，同时也确保用户和环境的安全。该设计... |
 |
拓纷生物制药冻干机 TF-LYO-40 | 卖方: 上海拓纷机械设备有限公司 | LYO生物制药冷冻干燥机采用标准化制造工艺生产，降低制造成本，缩短生产周期，同时确保性能和可靠性。冷冻干燥机的设计优先考虑安全性、多功能性、可靠性和长使用寿命，同时也确保用户和环境的安全。该设计... |
 |
拓纷生物制药冻干机 TF-LYO-30 | 卖方: 上海拓纷机械设备有限公司 | LYO生物制药冷冻干燥机采用标准化制造工艺生产，降低制造成本，缩短生产周期，同时确保性能和可靠性。冷冻干燥机的设计优先考虑安全性、多功能性、可靠性和长使用寿命，同时也确保用户和环境的安全。该设计... |
 |
拓纷生物制药冻干机 TF-LYO-20 | 卖方: 上海拓纷机械设备有限公司 | LYO生物制药冷冻干燥机采用标准化制造工艺生产，降低制造成本，缩短生产周期，同时确保性能和可靠性。冷冻干燥机的设计优先考虑安全性、多功能性、可靠性和长使用寿命，同时也确保用户和环境的安全。该设计... |
 |
拓纷生物制药冻干机 TF-LYO-15 | 卖方: 上海拓纷机械设备有限公司 | LYO生物制药冷冻干燥机采用标准化制造工艺生产，降低制造成本，缩短生产周期，同时确保性能和可靠性。冷冻干燥机的设计优先考虑安全性、多功能性、可靠性和长使用寿命，同时也确保用户和环境的安全。该设计... |
