High Frequency Dryer For Insulation Cardboard

Explore More Insulation Cardboard Drying Machines Products

High-Frequency Dryer For Corner Ring Insulation Cardboard mainly applied in drying and forming paperboard and

It is an advanced process method to dry and mold the insulated board with the high-frequency electric field.

This production method has many obvious advantages compared with the traditional steam, electric drying, and hot air processing methods.

The high-frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in function. For many years, it has been applied to a large number of large enterprises at home and abroad. All well received by users both at home and abroad.

Unlike traditional heating, high-frequency heating uses the strong penetration ability of high-frequency electric field (high-frequency electric field penetrability is far stronger than microwave), which makes the material molecules repeatedly polarized, resulting in severe friction and self-heating from inside to outside. It does not require any preheating and heat conduction, so its heating efficiency is very high.

In addition, high-frequency heating is superior to traditional drying and microwave drying, that is, the electric field can realize selective heating through the mould, concentrate energy on the location where heat is needed, and further avoid unnecessary consumption.

Therefore, it can not only greatly save energy, but also greatly shorten the heating time and improve the production efficiency.

Angle ring heating time usually chord length 550mm and thickness 2.5-3mm of not more than 6 minutes, chord 700mm angle ring heating time is 8 minutes. If the multi-layer material is dried together at the same time, the cost will be reduced more.

Because in the heating process, the material of the water evaporated quickly, and the heat dissipation condition is better than the inner surface, the inner temperature will be slightly higher than the outer layer, according to the material drying theory: with heating process, maintain steam pressure and heat transfer in the same direction is most conducive to the drying of materials.

This heating method not only makes the internal fast and thorough but also completely avoids the phenomenon of the external coke.

Because of the high-frequency electric field heating both inside and outside, it is more suitable for the insulation material or multi-layer material to be heated at the same time.

When the material is heated in the high-frequency electric field, the equipment will put pressure on the mold, so that the material in the water was a lot of extrusion and molding in the electric heating at the same time.

In this process, if the material itself contains impurities like metal powder with low insulating, impurity will produce high temperature overheating and even breakdown insulating board in the high-frequency electrical field. At this time the equipment will warn alert，and start the protection system so that the disqualified material is eliminated during the heating process.

Ensure the quality of the product so that it is suitable for higher insulation requirements.

This high-frequency drying equipment does not require any auxiliary equipment. After electrifying and material loading, the whole drying process can be completed by pressing a button. The operation is very simple.

There is no pollution to the environment. Without any dust, smoke or high temperature.

The national high-frequency electric field leakage standard: 25V/m, our company's equipment is tightly shielded by various protection technologies. The measured leakage value is only 0.2-1V/m, which is 20 times better than the national standard. Effectively protect the human body and protect other equipment from the high-frequency electric field.

Liaoning Unify High-Frequency Equipment Co., Ltd. is a renowned Chinese welding machine supplier, we provide high frequency plastic welding machine, hf welder for sale, high frequency pvc welder, dryer insulationand etc. Want to know more? Please contact us.

Other supplier products

	Inflatable Products Welding Machine	Inflatable Seam Sealer The inflatable seam sealer mainly applies to plastic packaging, double blister sealing packaging, plastic Elevators sealed p...
	High Frequency PVC Door Curtain Welding Machine 2019	Equipment Description of High Frequency PVC Door Curtain Welding Machine UNIFY's consistent superior quality has been upheld. The width of fully au...
	HF Blister Packaging Welders	The HF blister welding machineis an inexpensive option for creating packages that are durable, transparent, and tamper proof. We make a variety of ...
	Car Seat Embossing HF Welder	Equipment Description ofCar Seat Embossing Hf Welder The two sides of theseat cover welding machinecan be set up with three sections of adjusta...
	Explore More Insulation Cardboard Drying Machines Products	It is an advanced process method to dry and mold the insulated board with high-frequency electric field. This production method has many obvious ad...

供应产品

Same products

	Aixun T320 智能精密焊台，带 T245/210 手柄	卖方: 深圳市维客修科技有限公司	描述 JCID Aixun T320 智能集成精密焊台，带 T245 T210 手柄 C210 C245 烙铁头，适用于手机平板电脑电子 BGA 主板 SMD 芯片焊接维修。JC-...
	JTX Nano Conductive Silver Paste For Phone Screen Line Circuit Repair	卖方: Phonefix	JTX Nano Conductive Silver Paste repairs iPhone screen/green screen/white screen lines issues cau...
	ATTEN ST-862D 1000W 热风枪数显 BGA 返修台	卖方: PHONEFIX technology Co.,Ltd	描述ATTEN ST-862D 无铅热风枪焊台用于 PCB BGA 焊接维修工具，1000W 旋风 ATTEN ST-862D 无铅热风枪焊台，ATTEN ST-862D 智能数显返修台用于手机...
	XZZ FX-210 无铅焊台 2S 快速升温	卖方: 深圳市维客修科技有限公司	XZZ FX-210 /SUGON T26D 焊台带 JBC C210 烙铁头无铅 BGA 返修台。XZZFX-210精密焊台无铅 2S 快速焊接工具，适用于手机平板电脑电子逻辑板 BGA CP...
	YCS S1-160W Soldering Station Compatible T210 T115 T245 Handle	卖方: Phonefix	YCS S1-160W 110V-220V Digital Soldering Station with automatic sleep function compatible with T24...