CARBIDE ROD
Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.4HRA to 95HRA. Carbide rod is the raw material to make cutting tools, such as end mills, reamers, turning tools, carbide planer cutters, carbide drills, carbide boring bar cutters, etc., for cutting or machining cast iron, non-ferrous metals, plastics, chemical fiber, graphite, glass, stone, and ordinary steel, heat-resistant steel, stainless steel, high manganese steel, tool steel, wood, and other difficult-to-cut materials. As one of the top tungsten carbide rod suppliers, Betalent carbide is especially good at carbide bars for cutting difficult-to-cut materials and super hard matels.
Common used Betalent carbide grades table with physical characters and application for carbide rods. To be simple, grade BT45 is for cutting tools machining materials of which hardness is 45(+/-3)HRC, BT50 for 50(+/-3)HRC, BT55(+/-3)HRC for BT(+/-3)HRC, for special applications beyond this table, please consult professional salesperson, there are more grades can be available, and Betalent can offer you solution in carbide grade selection and application with its professional technical team and production facilities.
|
Grade |
Co% |
Grain Size(micron) |
Density (g/cm) |
Hardness(HRA) |
TRS N/mm2 |
Application |
|
BT45 |
10 |
4400 |
For general drill bit, end mill and punching die |
|||
|
BT50 |
10 |
4400 |
For general drill bit, end mill machining titanium alloy, stainless steel and gray cast iron. |
|||
|
BT55 |
12 |
4600 |
For cutting tools machining titanium alloy, heat resistant alloy, stainless steel, quenched steel(HRC55-58), gray cast iron. |
|||
|
BT60 |
9 |
5000 |
For cutting tools machining quenched materials (HRC60-65), hardwood and high polishing cutters. Finish machining 316L stainless steel. |
As one of the most professional carbide rod suppliers, Xiamen Betalent Carbide Co., Ltd provides cemented carbide products, tungsten carbide hardfacing welding rods, tungsten carbide round stock, carbide cutter, tungsten carbide rods for sale, etc. Contact us to buy tungsten rodor know tungsten carbide rod prices.
在线联系供应商
Other supplier products
 |
COLD HEADING DIE CORE NUT DIE | The cold headingdie bears the heavy pressing load, and its female die surface bears high-pressure stress so that the die core material is required ... |
 |
SAW TIP | Xiamen Betalent Carbide Co., Ltd is one of theprofessional tungsten carbide manufacturers, focusing on designing, producing, and selling cemented ... |
 |
COOLANT DRILL BITS | Betalent carbide coolant-through drill bits application and advantages: d Cutting dia.(mm) D Shank dia.(mm) Lc... |
 |
CARBIDE STRIPS | Carbide flatsare referring the rectangular tungsten carbide rod, also known as tungsten carbide strips.It is produced by the same way as carbide ro... |
 |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer end mill: A suitable negative front angle design is adopted, which takes into account the edge stren... |
Same products
 |
Ferrite Block Magnets | 卖方: Hangzhou Tengye Magnetic Materials Co., Ltd. | Block ferrite magnetsare a type of permanent magnet made from a mixture of iron oxide and barium ... |
 |
CUSTOM HIGH DENSITY GRAPHITE ROD | 卖方: Pingdingshan Wanhui Graphite Co., LTD | WH conductive graphite roduses graphite block as raw material. After the processing of profession... |
 |
Round Magnet N52 1/2 inch x1/8 inch Small Flat Magnet Disc | 卖方: Huatai Xinding（Beijing）Metal Materials Co., Ltd. | This powerful small neodymium magnetsmeasures 1/2" in diameter, 1/8" in thickness, with the pull ... |
 |
Magnetic Assemblies | 卖方: Huatai Xinding（Beijing）Metal Materials Co., Ltd. | Magnet assemblyincorporates magnet alloy and non-magnet material, usually creating much more magn... |
 |
Lead free Brass Rod | 卖方: Ningbo Jintian Copper (Group) Co., Ltd., | Jintian is a leading manufacturer of high-quality lead free brass rodbased in China. The company ... |
