Application of Wire Rope Isolator for Vibration Damping in Vibration and Shock Isolation

With the deepening of isolation research and the development of isolation technology, nonlinear isolators suitable for various occasions have emerged. Laminated springs for the automotive industry are widely used in China. The principle is to use the dry friction between the steel plates to reduce the vibration and impact caused by the unevenness of the road. There are metal conical coil springs for the civil industry, as well as air springs.

During the entire deformation process of the wire rope shock mounts, sliding friction will occur between each wire rope, which consumes a large amount of energy and has a high equivalent damping ratio. Moreover, the wire rope anti vibration mounts exhibit nonlinear softening characteristics in a large deformation range, the stiffness decreases as the deformation increases, and the vibration isolation rate increases. Therefore, the good broadband isolation performance of the wire rope isolator for vibration damping is especially suitable for the application of vibration and shock environment isolation.

The wire rope shock mounts have only been developed in the last 30 years. Compared with the above-mentioned isolators, it has four distinct advantages:

①Nonlinear soft characteristics;

②Multi-directional isolation, high damping ratio;

③Corrosion, high and low temperature resistance;

④Compact structure and light weight.

At present, the common wire rope anti vibration mounts have several types of spiral, arch and ring. But in either case, they are made of stainless steel wire rope wound or bent. Their common advantage is the three-way protection of the equipment, reliable operation in high temperature and harsh environments, wide load range, unlimited storage period and service life. In terms of impact resistance, it can achieve maximum impact attenuation in a minimum space, and its vertical allowable deformation can reach 40~60% of the height of the vibration isolator. In foreign countries, they are used in the transportation of some equipment to replace the impact-resistant packaging of raw plastics and rubber. Rocket and missile transport vehicles also use it. In terms of ships, it passed the tests of light impact machines, heavy impact machines and floating impact platforms to meet the requirements of MIL-S-901 and MIL-STD-167. The wire rope isolator has excellent durability and fatigue. A vibration isolator with a diameter of 2.4 mm has been tested for up to 150 hours and seven million tests at 13 Hz and ±1.5 mm amplitude. The result is safe and sound.

For a 1.5mm wire rope isolators dampingwith a 1.5mm diameter, a sweep vibration test up to 10KHZ was performed, and the vibration isolation effect was 95%. This proves that the wire rope isolator for vibration dampingcan isolate small amplitude and structural noise. Wire rope anti vibration mounts are widely used in vibration and shock isolation of instruments, instruments, control boxes, etc., and some of the original rubber vibration isolators have been replaced by wire rope shock mounts.

Xi'an Hoan Microwave Co. Ltd., headquartered in China, Xi’an city, was founded in 2005, is a premier supplier of Industry Energy Absorption and Vibration Isolation Products. Contact us today to see how our wire rope mountscan benefit your special equipment application demands or in any way that we can help you meet your production requirements.

Other supplier products

	Marine Wire Rope Vibration Mounts	Advantages of Marine Wire Rope Vibration Mounts (GRY Series) Anti vibration camera mountsare comprised of stainless steel stranded cable threaded ...
	Multi-Application Wire Rope Vibration Isolator	We have compact wire rope isolator for sale! Hoan multi-application wire rope vibration isolator is used widely in the field of RC car, camera dron...
	JGX-1598 Wire Rope Vibrationsisolator/Shock Isolator For Multi Application	Vibrationsisolatorer Wire rope isolators are also called wire rope anti vibration mounts, which are used to control vibration produced by motors f...
	GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone	The GRY-5A marine shipbuilding vibration mount is made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. The max static loa...
	GH-30G Military Defense Vibration Isolator	Wire rope isolators are also called wire vibration isolators, which are comprised of stainless steel stranded cable threaded through aluminum retai...

供应产品

Same products

	Class 300 Valve	卖方: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	卖方: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	卖方: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	卖方: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	卖方: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...