多级串联轴承圆柱滚子推力轴承M4CT2385 23*85*129.5mm
串联推力轴承M4CT2385可以在有限的空间内承受重载，并在轴向方向上提供牢固的支撑，并且摩擦力低，使用寿命长。 此外，这些轴承通过油润滑移动。 此外，这些串联推力轴承主要用于橡胶和塑料行业的单螺杆和双螺杆挤出机的齿轮箱。 串联轴承主要装有标准的轴向圆柱滚子和轴承组件。 推力圆柱滚子轴承M4CT2385，尺寸23*85*129.5mm，内径：22mm，外径：64mm，总高：102.5mm
串联轴承旧代号 基本尺寸单位(mm) 基本额定载荷
单位（千牛）
内径 外径 高度 Cr Cor
M4CT2385 23 85 129.5 427 2060
在线联系供应商
Other supplier products
 |
Special bearing 526720 for 560CT tubular strander machine | Special bearings 526720 for high speed wire cable tubular stranding machines are of the type cylindrical roller bearing and have a lubrication groo... |
 |
Extruder equipment gearbox use bearing M8CT2552 size 25x52x165mm eight stages | The thrust cylindrical roller bearing m8ct2552with size 25X52X165mm , the inner diameter:25mm, the outer diameter:52mm, the total height:165mm ... |
 |
交叉滚子轴承无齿 XSU 140414 484x344x56mm | Description XSU 140414Ncrossed roller slewing bearing Dimension(ODXIDXH) 484x344x56mm Outer diameter(OD) 484mm Inner diameter... |
 |
石油螺杆钻具专用轴承 M4CT3073E 四级滚轮 30x73x122mm 现货 | 串联推力轴承 M4CT3073E 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4C... |
 |
The twin screw extruder gearbox use bearing FT8AR in stock | The bearing FT8AR mainly used for the high speed extruder machine gearbox shaft. It consisit of the washer ring and housing ring and cage with roll... |
Same products
 |
I. 1100.22.00.A slewing bearing, | 卖方: JinHang Precision Bearing Co.,LTD | Description I. 1100.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance ... |
 |
I.880.22.00.A slewing bearing, | 卖方: JinHang Precision Bearing Co.,LTD | Description I.880.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
 |
I. 1000.22.00.A slewing bearing | 卖方: JinHang Precision Bearing Co.,LTD | Description I. 1000.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance ... |
 |
I.800.22.00.A slewing bearing supplier | 卖方: JinHang Precision Bearing Co.,LTD | Description I.800.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
 |
I.700.22.00.A slewing bearing supplier | 卖方: JinHang Precision Bearing Co.,LTD | Description I.700.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
