食品挤出机串联轴承 M4CT30100 四级推力滚轮 30x100x151mm
串联推力轴承 M4CT30100 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4CT30100是4级推力滚子轴承，内径：30mm，外径：100mm，高度：151mm
串联轴承旧代号 基本尺寸单位(mm) 基本额定载荷
单位（千牛）
内径 外径 高度 Cr Cor
M4CT30100 30 100 151 499 2371
在线联系供应商
Other supplier products
 |
Precision bearing Z-527456.ZL for Tubular stranding machine | The bearings Z-527456.ZL 360X440X38MM are separable and are therefore easier to mount and dismount. As a result, both bearing rings can be given a ... |
 |
管绞机使用单列圆柱滚子轴承 527469 轴径 1250mm | 轴承代号 527469轴承内径1250mm结构单列圆柱滚子润滑油 高速油润滑轧辊环材料GCr15SiMn滚筒材质GCr15保持架材料黄铜精密级 P5 P6 可用应用 钢丝绳、钢丝绳管绞机交货时间 60 天特点将用于高速管绞机 |
 |
Cable strander high speed bearing Z527455ZL | Special bearings 527455 for high speed tubular stranding machines and have a lubrication groove and three lubrication holes in the outer ring.The b... |
 |
Precision bearing Z-527272.ZL for Tubular stranding machine | cylindrical roller bearings Z-527272.ZL with cage are available as non-locating, semi-locating and locating bearings.The bearings are separable and... |
 |
管绞机使用单列圆柱滚子轴承 566705 轴径 1250mm | 531 / 5,000 翻译结果 轴承代号 566705 |
Same products
 |
I. 1100.22.00.A slewing bearing, | 卖方: JinHang Precision Bearing Co.,LTD | Description I. 1100.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance ... |
 |
I.880.22.00.A slewing bearing, | 卖方: JinHang Precision Bearing Co.,LTD | Description I.880.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
 |
I. 1000.22.00.A slewing bearing | 卖方: JinHang Precision Bearing Co.,LTD | Description I. 1000.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance ... |
 |
I.800.22.00.A slewing bearing supplier | 卖方: JinHang Precision Bearing Co.,LTD | Description I.800.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
 |
I.700.22.00.A slewing bearing supplier | 卖方: JinHang Precision Bearing Co.,LTD | Description I.700.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance wi... |
