M5CT2264 food feed extruder tandem roller bearing 22x64x128.5mm in stock
Tandem thrust bearings M5CT1858 are designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a sufficient thrust load be applied to prevent roller slip. Typically, the minimum load required is expressed as a ratio of the bearing’s dynamic load rating (C) to the applied load (P). Loads representing C / P> 12 must be avoided and loads where C / P falls between 8 and 12 should be avoided. M5CT2264 is 5 stages thrust roller bearing with inner dia: 22mm size, outer diameter: 64mm, the height: 128.5mm
Tandem bearing old code Basic size unit (mm) Basic load rating
Unit (KN)
Inner dia Outer dia Height Cr Cor
M5CT2264 22 64 128.5 239 954
Other supplier products
|
|
塑料挤出机串联轴承 M4CT1037A 10x37x79mm |
Tandem Thrust BearingsM4CT1037Acan receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictio... |
|
|
RB40040 交叉滚子轴承 |
交叉滚子轴承RB40040 UUCC0技术数据如下：
交叉滚子轴承类型 RB40040 UUCC0轴径 400 毫米边界尺寸 510x400x40 毫米外圈直径 510 mm内圈直径 400 mm高度 40 毫米基本额定载荷 径向 C:241 KN Co:531 KN重量 23.5 公斤UU ... |
|
|
Large size plastic extruder machine use roller bearing M8CT120360 |
Tandem Thrust BearingsM8 CT120360can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frict... |
|
|
堆取料机使用 VLU 200644 748x534x56mm 滚珠轴承 |
描述 VLU 200644 回转球轴承尺寸(ODXIDXH) 748x534x56mm外径(OD) 748 mm内径(ID) 534 mm宽/高/(H) 56 毫米重量 36.5 公斤材料 42CrMo, 50Mn滚动LYC球包装内包装：塑料薄膜+牛皮纸+蓝色胶带； 外包装：标准出口免熏蒸木箱... |
|
|
VSI 200744 N 旋转轴承 816*648*56mm 用于浮式起重机货物设备 |
描述 VSI 200744 N 回转球轴承尺寸(ODXIDXH) 816x648x56mm外径(OD) 816 mm内径(ID) 648 mm宽/高/(H) 56 毫米重量 58 公斤材料 42CrMo, 50Mn滚动LYC球牙齿数据做660mm米 6牙齿数 110包装内包装：塑料薄膜+牛皮纸... |
供应产品
Same products
