食品挤出机多级串联推力轴承工厂 M6CT2872 尺寸 28x72x150mm
串联推力轴承 M6CT2872 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M6CT2872是六级推力滚子轴承，内径：28mm，外径：72mm，高度：150mm
串联轴承 基本尺寸单位(mm) 基本额定载荷
单位（千牛）
内径 外径 高度 Cr Cor
M6CT2872 28 72 150 434 1730
在线联系供应商
Other supplier products
 |
挤出机串联轴承 M2CT145385 145x385x233mm | The thrust cylindrical roller bearing M2CT145385with size 145x385x233mm , the inner diameter:145 mm, the outer diameter:385mm, the total height:233... |
 |
塑料挤出机齿轮箱轴承 M4CT2047 shaft 20x47x79mm | Tandem Thrust BearingsM4CT2047can receive heavy load in a limited space and support firmly in the direction of axis and last long with low friction... |
 |
twin screw extrudes gearbox thrust roller bearingM8CT2552 25x52x165mm | Tandem Thrust Bearings M8CT2552 can receive heavy load in a limited space and support firmly in the direction of axis and last long with low fricti... |
 |
串联推力轴承带轴工厂供应 M4CT140360 140*360*424mm | 串联推力轴承 M4CT140360 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4... |
 |
527456 cylindrical roller bearing for higher speed wire cable Tubular strander machine | 527456 cylindrical roller bearing for higher speed wire cable Tubular strander machine Bearing code 527456 Bearing size Contact B... |
Same products
 |
Cylindrical roller bearing 527272 for strander machine | 卖方: JinHang Precision Bearing Co.,LTD | cylindrical roller bearings Z-527272.ZL with cage are available as non-locating, semi-locating an... |
 |
Tubular Stranding machine use bearing 527247 | 卖方: JinHang Precision Bearing Co.,LTD | Bearing description:single row cylindrical roller bearing Service:offer drawing and technical sup... |
 |
Tubular Stranding machine use bearing 527462 | 卖方: JinHang Precision Bearing Co.,LTD | The cylindrical roller bearings 527462 have high rigidity, high radial load carrying capacity. B... |
 |
Stainless steel wire stranding machine 537024P5 | 卖方: JinHang Precision Bearing Co.,LTD | The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 537... |
 |
Cylindrical roller bearing 527461 for Tubular twister | 卖方: JinHang Precision Bearing Co.,LTD | Bearing factory items:Z-527461.ZL Bearing old type: 527461 The bearing z-527461.zl structure:sin... |
