XSI 141094 N bearing factory 1164x984x56mm for Gantry Cranes equipment
The slewing bearing XSI 141094 NBelongs to crossed bearing with internal teeth,It consist on inner ring outer ring and rolling parts.
The outer diameter:1164mm,
The inner diameter:984mm
The height:56mm
|
Description |
XSI 141094 Ncrossed roller slewing bearing |
|
Dimension(ODXIDXH) |
1164x984x56mm |
|
Outer diameter(OD) |
1164mm |
|
Inner diameter(ID) |
984mm |
|
Width/Height/(H) |
56 mm |
|
weight |
91 kgs |
|
Material |
42CrMo, 50Mn |
|
Rolling roller/ball brand |
LYC ball |
|
Teeth data |
|
|
do |
1000mm |
|
m |
8 |
|
Teeth number |
125 |
|
Package |
Inside package: plastic film + kraft paper + blue tape; Outside package: standardexport free-fumigation wooden case. |
在线联系供应商
Other supplier products
 |
High speed strander equipment bearing Z-527457.ZL | The single row cylindrical roller bearing Z-527457.ZL P5 use for high speed tubular stranding machine for steel,copper and aluminum stranding. |
 |
塑料挤出机专用轴承 M3CT3278 price 32x78x84mm | The thrust cylindrical roller bearing M3CT3278 with size 32x78x84mm, the inner diameter:32 mm, the outer diameter:78mm, the total height:84mm T... |
 |
食品挤出机多级串联推力轴承工厂 M6CT2872 尺寸 28x72x150mm | 串联推力轴承 M6CT2872 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M6CT... |
 |
Tunnel Boring Machines use XSU 140744 bearing 814x 674x56mm no teeth | Description XSU 140744Ncrossed roller slewing bearing Dimension(ODXIDXH) 814x674x56mm Outer diameter(OD) 814mm Inner diameter... |
 |
High speed roller bearing Z-540208.ZL 560X680X45MM | The cylindrical roller bearing 540208 has long using life,low noise,low maintence cost. Special bearings Z-540208.ZL for tubular stranding machines... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
