The Factory offer large gearbox M6CT30150A 30x150x335mm
Tandem thrust bearingsM6CT30150Aare designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a sufficientthrust load be applied to prevent roller slip. Typically, the minimum load required is expressed as a ratio of the bearing’s dynamic load rating (C)to the applied load (P). Loads representing C/P > 12 must be avoided and loads where C/P falls between 8 and 12 should be avoided.M6CT30150Ais6stages thrust roller bearing with inner dia:30mm size,outer diameter:150mm ,the height:335mm
|
Tandem bearing |
Basic size unit(mm) |
Basic load rating Unit (KN) |
|||
|
Inner dia |
Outer dia |
Height |
Cr |
Cor |
|
|
M6CT30150A |
30 |
150 |
335 |
2205 |
9250 |
在线联系供应商
Other supplier products
 |
slewing bearing RKS.061.20 0744 size 838.8x672x56mm with external teeth for Casting Equipment | Product Name: Slewing bearing turntable bearing slewing ring swivel bearing Model: Old model: RKS.061.20 0744 SKF bearing code ... |
 |
油加工机中的螺旋压力机使用推力串联辊 M4CT33105 轴承 33x105x151mm | 串联推力轴承 M4CT33105 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4C... |
 |
Slewing/turntable bearing 232.20.0600.503 with size 948x734x56 | The 232.20.0600.503standard series is a light-weigt series from the slewing bearing range.For reasons of economy the bearing cross sections in this... |
 |
Supply Cooper rope strander equipment bearing Z-536020.ZL | Single row cylindrical roller bearings Z536020ZL with cage are available as non-locating, semi-locating and locating bearings.the bearing 536020 ap... |
 |
High-speed Tubular Strander use the cylindrical roller bearing 527463 shaft diameter 670mm | Bearing code 527463 Bearing size Contact Bearing outer dia Contact Bearing inner dia 670mm Bearing height Contact ... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
