Eight stages thrust cylindrical roller bearing M8 CT30127 transmission shaft 30x127x372mm
The thrust cylindrical roller bearingm8ct30127 with size 30X127X372mm
, the inner diameter:28mm, the outer diameter:90mm, the total height:281mm
|
Tandem bearing |
Basic size unit(mm) |
Basic load rating Unit (KN) |
|||
|
Inner dia |
Outer dia |
Height |
Cr |
Cor |
|
|
m8ct30127 |
30 |
127 |
372 |
1488 |
8435 |
在线联系供应商
Other supplier products
 |
Single row cylindrical roller bearing N18/560 560*680*56mm | Bearing code N18/580mp5 Bearing size 560x680x56mm Bearing outer dia 680 mm Bearing inner dia 560mm Bearing height 56... |
 |
61852 deep groove BALL strander bearing 260*320*28mm | Bearing code 61852mp5 Bearing size 260x320x28mm Bearing outer dia 320 mm Bearing inner dia 260mm Bearing height 28mm ... |
 |
VSI200844 N 轴承 916x736x56mm 带内齿 | 描述 VSI 20 0844 N 回转球轴承尺寸(ODXIDXH) 916x736x56mm外径(OD) 916 mm内径(ID) 736 mm宽/高/(H) 56 毫米重量 69 公斤材料 42CrMo, 50Mn滚动LYC球牙齿数据做 752 毫米米 8牙齿数 94包装内包装：塑料薄膜+牛... |
 |
M5CT1858X2多级圆柱滚子轴承现货18*58*107.5mm | 串联推力轴承 M5CT1858 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M5CT... |
 |
B7012-E-TVP-P4-UL FAG原装机床主轴轴承，带聚酰胺保持架60x95x18mm | B7012-E-TVP-P4-UL FAG原装机床主轴轴承，带聚酰胺保持架60x95x18mm B7012-E-TVP-P4-UL FAG原装机床主轴轴承，带聚酰胺保持架，尺寸为60x95x18mm，它的精度等级为P4，采用超级钢材料制成。金航精密轴承主要提供主轴轴承，交叉滚子轴承，... |
