Deep groove ball bearing 618/500 500*620*56mm
|
Bearing code |
618/500mp5 |
|
Bearing size |
500x620x56mm |
|
Bearing outer dia |
620 mm |
|
Bearing inner dia |
500mm |
|
Bearing height |
56mm |
|
structure |
Single row deep groove ball bearing |
|
Lubrication |
Oil lubrication for high speed |
|
Rolling |
ball |
|
Ring material |
GCr15SiMn |
|
Roller material |
GCr15 |
|
Cage material |
Brass |
|
Precision grade |
P5 P6 Available |
|
Heat treatment |
HRC85-62 |
|
Application |
Steel wirerope ,Wire cable Tubular Strander machine |
|
Delivery time |
In stock,if exstock, the delivery time about 30 days |
|
Shipping term |
By sea or by air |
|
Package |
Strong carton or wooden case |
|
Feature |
Will use for higher speed tubular strander machine |
在线联系供应商
Other supplier products
 |
Supply thrust roller bearing F-96517.T2AR with shaft | Supply thrust roller bearing F-96517.T2AR with shaft F-96517.T2AR f-96709.t2ar BEARINGS specification as following: Bearing Old bearing cod... |
 |
串联推力轴承带轴工厂 M4CT2362A 23*62*105mm | 串联推力轴承M4CT2362A可以在有限的空间内承受重载荷，并在轴向方向上提供牢固的支撑，并且摩擦力低，使用寿命长。 此外，这些轴承通过油润滑移动。 此外，这些串联推力轴承主要用于橡胶和塑料行业的单螺杆和双螺杆挤出机的齿轮箱。 串联轴承主要装有标准的轴向圆柱滚子和轴承组件。 推力圆柱滚子轴承M... |
 |
石油螺杆钻具专用轴承 M4CT3073E 四级滚轮 30x73x122mm 现货 | 串联推力轴承 M4CT3073E 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4C... |
 |
Vertical grinder reducer machine use 24064CCW33 Spherical roller bearing 320x480x160mm | Spherical roller bearing 24064CCW33 used for vertical grinder reducer machine, the bearing technology data as following: Bearing type 24064CCW33 B... |
 |
f-212505.t4ar four row tandem roller bearing with shaft | f-212505.t4ar four row tandem roller bearing with shaft F-212505.T4AR f-212505.t4ar bearings specification as following: Bearing Old bearin... |
Same products
 |
Tandem roller bearing M4CT3278 with shaft 78x32x110.5mm | 卖方: JinHang Precision Bearing Co.,LTD | The tandem roller extruder bearing m4ct3278 that use for PVC screw extruder gearbox, the shaft di... |
 |
Tandem roller bearing F-86722 for Rubber extrusion machine | 卖方: JinHang Precision Bearing Co.,LTD | The bearing f-51909 t3ar mainly used in the twin screw plastic extrusion machine gearbox.The bear... |
 |
Tandem roller bearing t6ar3278 for the extruder shaft gearbox | 卖方: JinHang Precision Bearing Co.,LTD | The bearing T6 AR 3278 with size 32X78X163.5mm mainly used for the high speed extruder machine ge... |
 |
Tandem roller bearing MTCT2468 for Screw extrude gearbox | 卖方: JinHang Precision Bearing Co.,LTD | The bearing M5CT2468 for food/feed/plastic/rubber extrusion machine gearbox use. With high perfor... |
 |
twin screw extruder gearbox used t5ar3278 bearing | 卖方: JinHang Precision Bearing Co.,LTD | Bearing T5AR3278 fullsize 32x78x137mm bearing actual picture, Please reference them. Bearing fact... |
